1.
Numerical Simulation on Thermal Characteristics of Burner for Diesel Exhaust
柴油机排气加热燃烧器热力特性数值模拟
2.
Heated air is forced into the upper tier of ducts.
加热的气流被送入上面的一排管道。
3.
deaerating heater
除气加热器除氧加热器
4.
exhaust manifold heat control valve
排气歧管热量控制阀
5.
Remove exhaust manifold heat shiel
拆下排气歧管隔热罩。
6.
Install exhaust down pipe heat shiel
安装排气下行管隔热罩。
7.
To draw moisture from, as by heating, leaving only the dry solid portion.
使脱水通过加热使水气排出以留下干燥的固体部分
8.
After-Treatment for Reduction of Diesel Exhaust Particulate and Infrared Heating Regeneration;
基于红外加热再生的柴油机排气微粒后处理技术的研究
9.
Reducing Emission of Gasoline Engine During Cold-Start Using a Rapid Air Heater
快速空气加热器减少汽油机冷起动排放的试验研究
10.
The Exhaust After-treatment Technologies of Ship Diesel Engine Based on Electrostatic Precipitator and Electrical Regeneration
基于静电捕集与电加热技术的船舶柴油机排气后处理技术
11.
"The non-oxidizing zone is consisted of entry sealed room, waste gas preheating zone, direct heating zone, and furnace nozzle and flue gas exhausting system. "
无氧化段由入口密封室,废气预热区,直接加热区,炉喉,废气排放系统组成
12.
With the heater control unit in the HEAT position, operate engine with coolant tank cap tightene
让加热器控制单元处于HEAT（加热）位置，旋紧冷却剂贮藏箱填压力/排气盖之后操作引擎。
13.
heater flue couple
加热炉废气的热电偶
14.
steam air heater
蒸汽加热式空气预热器
15.
direct-heating gas burner
直接加热煤气灯,直接加热煤气燃烧器
16.
The standard furnace utilizes the supercharge preheating technique where the waste gases, being exhausted over the top of the crucible, preheat the solid charge.
在坩埚的顶端排出废气，预热装料处，这种标准炉采用了加压预热技术。
17.
The basic exhaust system consists of an engine exhaust manifold, exhaust pipe, exhaust heat shield(s), muffler and exhaust tailpipe
基本排气系统包括一个引擎排气歧管、排气管道、排气隔热罩、消音器和排气尾管
18.
instantaneous open-flued (natural draught) gas water heater
即热普通烟道式（自然排烟）气体热水炉