1.
high pressure coolant injection system
高压冷却剂注入系统
2.
No refrigerant in the refrigerant system.
冷却系统中没有冷却剂。
3.
Continue to fill the system until the coolant tank is full.
持续填注冷却系统，直到冷却剂贮藏箱填满。
4.
Fill cooling system (refer to Group 7, Cooling System for the proper procedure).
注入冷却系统（有关正确程序请参阅单元7，冷却系统）。
5.
low pressure coolant recirculation system
低压冷却剂再循环系统
6.
reactor coolant system dose equivalent
反应堆冷却剂系统剂量当量
7.
charging/make-up flow [reactor coolant system]
上充／补给水流量〔反应堆冷却剂系统〕
8.
Current situation and development of biocide to cycle-cooling water system;
循环冷却水系统杀生剂的现状与发展
9.
Research and Development on Cooling System of Injection Mold CAD
注塑模具CAD冷却系统的研究与开发
10.
Analysis on the Cooling System for Injection Mold of Bottom Cover based on Moldflow
基于Moldflow的底座注塑模冷却系统分析
11.
Research on CAD/CAE Technology for Cooling System Unit of Plastic Injection Molds
注塑模具冷却系统库的CAD/CAE技术研究
12.
Vacuum created in cooling system on engine cool-down is not being relieved through coolant reserve/overflow system.
引擎冷却时冷却系统所产生的真空没有通过冷却剂储存/溢流系统排放。
13.
a cooling system used in industry to cool hot water (by partial evaporation) before reusing it as a coolant.
工业上冷却热水的冷却系统为了把它作为散热剂再利用。
14.
"In a refrigeration system, the cooling is produced as the rapid evaporation of the liquid refrigerant absorbs heat."
在冷冻系统中,液体冷冻剂快速蒸发而吸热产生冷却效果。
15.
Drain cooling system (refer to Group 7, Cooling System).
排干冷却系统（见单元7-冷却系统）。
16.
Simulation Model of Natural Circulation in PWR Coolant System under Ocean Conditions
海洋条件下冷却剂系统自然循环仿真模型
17.
Development and Application Research of Corrosion and Scale Inhibitor Used in Recirculating Cooling Water System;
循环冷却水系统缓蚀阻垢剂的开发应用研究
18.
Research on the Technique of Distributed Control System for Pressurized Water Reactor Coolant System;
压水堆核电厂主冷却剂集散控制系统技术研究