1.
Effect on the Joint Quality by the Structure of the Stir Welding Pin;
搅拌焊针结构形状对焊缝成形的影响
2.
Influences of welding parameters on weld appearance in laser-MIG hybrid welding of AZ31
AZ31激光-MIG复合热源焊接参数对焊缝形貌的影响
3.
Effects of Short-Circuit Transfer on Formation of Weld Under High Speed Welding
高速焊短路过渡过程对焊缝成形影响分析
4.
The Study of the Horizontal Residual Stresses of the Butt Welded Joint of Steel Member;
钢构件对接焊焊缝横向残余应力研究
5.
Effect of Multi-component Active Fluxes on Penetration in TIG Welding
多组元活性剂对TIG焊焊缝熔深的影响
6.
Effect of welding parameters on aluminum alloy VPPA weld formation
焊接参数对铝合金VPPA焊缝成形的影响
7.
As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.
对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。
8.
Analysis and countermeasures of overproof of the edge deviation of welding line in circular seam welding of boiler drum
锅筒环缝对接焊缝边缘偏差超标分析及对策
9.
Welding the welds which are stagger first, then is the straight ang long weld.
先焊错开的端焊缝，后焊直通长焊缝。
10.
Effect of Cu and Nb on Microstructure and Tensile Strength of Multi-Layer Weld HASL Steel;
铜和铌对HSLA钢多层焊焊缝组织和性能的影响
11.
CO_2 Gases Welding Seam in the Application of the Steel Docking;
CO_2气体保护焊在管钢对接焊缝中的应用
12.
Effects of the synergic-pulsed MIG welding on the microstructure and properties of 2195 Al-Li alloy welds
双脉冲MIG焊对2195Al-Li合金焊缝组织及性能的影响
13.
Analysis on welder's operating methods influencing quality of fillet weld of stainless sheet plate
焊工操作手法对不锈钢薄板角焊缝质量的影响
14.
Effect of activating fluxes on appearance of weld in thin plate electron beam welding of nickel-base super alloy GH4169
活性剂对GH4169薄板电子束焊接焊缝成形的影响
15.
Microstructure and performance of friction stir welding in 6063 aluminum alloy
5mm厚6063铝合金搅拌摩擦对焊焊缝组织分析
16.
Influence of processing parameters on weld forming in double-pulse MIG welding of aluminum alloy
工艺参数对铝合金双脉冲MIG焊焊缝成形的影响
17.
Close examination of the plug welds showed the existence of herringbone patterns near the slag and voids in welds.
对塞焊焊缝的详细检查表明在焊渣及气孔附近，焊缝中存在着人字型裂纹。
18.
Weldability and Microstructure of Copper Joints Welded by Two Kinds of Phosphor-copper Brazing Filler Metal
两种铜磷钎料对紫铜钎焊的焊接性能和焊缝组织对比