1.
The stroke of cylinder bearing with compressing loading is controlled by buckling strength.
承受压缩负载的油缸的行程通过压曲强度来控制。
2.
Local Buckling and Post-Buckling Strength of Tapered Member;
楔形压弯构件的局部屈曲及屈曲后强度
3.
Testing method for static flexural strength of piezoelectric ceramics
GB/T11387-1989压电陶瓷材料静态弯曲强度试验方法
4.
Fatigue Strength and Fillet Rolling Study of Ductile Iron Crankshaft for YC6108ZQ Diesel Engine
YC6108ZQ柴油机球铁曲轴疲劳强度及圆角滚压研究
5.
Study on Concrete Compressive Strength Curve of Member Bottom Surface Detected by Rebound Method
回弹法检测构件底面混凝土抗压强度曲线研究
6.
Study on autoclaved sand-lime brick masonry by bending tensile strength test
蒸压灰砂砖砌体弯曲抗拉强度试验研究
7.
Computer Simulation Analysis of Static Bending Strength for Piezoelectric Ceramics
压电陶瓷材料静态弯曲强度的计算机仿真
8.
compressive strength, compression strength
抗压强度,耐压强度
9.
crossbreaking strength
横断裂强度, 挠曲强度
10.
The Crankshaft Parametrical Model Technique and Intensity and Study of Residual Deforming in Rolling;
曲轴参数化建模技术及强度和滚压残余变形的研究
11.
The In-Plane Stability Carrying Capacity Analysis of Beam-Columns Considering the Post-Buckling Strength of the Web;
考虑腹板屈曲后强度压弯构件平面内稳定承载力研究
12.
The Testing of Connection Curve in Supersonic & Rebound Quantity and Compression Strength;
路面混凝土超声、回弹值——抗压强度关系曲线的实测
13.
Structure optimum of hydraulic hatch cover based on corrosion aspect and buckling strength
考虑腐蚀影响与屈曲强度的液压折叠式舱口盖结构优化
14.
oil pressure test for
strength油压强度试验
15.
The relationship between compressive strength (flexural strength) with ice temperature, stress and direction is analysed in the paper.
分析了海冰的压缩强度和弯曲强度与冰温、应力率和加载方向的关系。
16.
repeated bending stress strength
反复弯曲疲劳强度极限
17.
Sensitivity Analysis on the Elastic Buckling and Ultimate Strength of Continuous Stiffened Aluminium Plates Under Combined In-Plane Compression and Lateral Pressure
平面内压力和侧向压力组合作用下连续加劲铝板弹性屈曲和极限强度的敏感性分析
18.
Influence of Training with Secondary Load on Bending Fatigue Strength of Cranksh aft
次载锻炼对曲轴弯曲疲劳强度的影响