1.
hinge (guide) bracket bolt
绞链(导向)托架螺栓
2.
draw-bar carrier bolt
牵引杆托(板)螺栓
3.
Position plate bracket and install attaching bolts through vehicle rear crossmember.
定位板托架并穿过车辆后横梁安装附接螺栓。
4.
LDP Pump Bracket Nuts/Bolts
LDP泵支架螺帽/螺栓
5.
If necessary, remove bolts attaching bumper mounting brackets to frame.
如果需要，拆去连接保险杆固定托架到车架的螺栓。
6.
LEFT ENGINE MOUNT BRACKET LOWER BOLTS
左引擎固定支架下螺栓
7.
Bolt, X-member/rear support
螺栓，X型构件/后支架
8.
High strength bolts for joints of space grid structures
GB/T16939-1997钢网架螺栓球节点用高强度螺栓
9.
Remove nuts, U-bolts and spring bracket from axle.
由车轴拆下螺帽，U型螺栓和弹簧支架。
10.
The brackets want an extra screw.
托架需要再加一个螺钉。
11.
Support Cushion/Bracket Nuts (Manual)
支撑垫/托架螺帽（手排）
12.
Tighten the engine mount-to-bracket bolts.
拧紧引擎架至支架的螺栓。
13.
Bushing Retainer To Suspension Cradle Attaching Bolts
衬套扣环与悬吊架接合螺栓
14.
The cross girder center segments of the bents were field bolted.
构架横梁的中间段在工地用螺栓连接。
15.
Anchor/support bolt holes are located in base of body.
固定器/支架螺栓孔位于阀门的基座。
16.
Test Research on Fatigue Behavior of Gird Structure with Bolt-sphere Joints;
螺栓球节点网架疲劳性能的试验研究
17.
The Replace and Quality Supervision for the Bolt of the Steel Rigid Frame Node;
钢架节点连接螺栓的代换及质量监督
18.
Remove the upper suspension arm nut and bolt at the axle bracket.
从车轴支架上拆去上端悬吊臂螺帽和螺栓。