1.
Analysis and countermeasures of the corrosion factors of underwater propeller stainless steel blades
水下推进器不锈钢叶片腐蚀因素分析及对策
2.
Primary Development of High Strength and Hot Corrosion Resistance Aero-Engine Turbine Blade Material DZ68 Alloy;
高强抗热腐蚀航空涡轮叶片材料（DZ68）的初步研制
3.
Influence of the TiN film layer on the anti-erosion performance of the 2Cr13 stainless steel blade
TiN膜层提高2Cr13不锈钢叶片的抗冲刷腐蚀性能
4.
Zinc is generally caustic to foliage.
锌常对幼叶有腐蚀作用。
5.
The Reason of Corrosion on the Compressor Blade When Removing Silver with Acid and the Protection Measurement
压气机叶片酸洗除银过程腐蚀原因分析及预防措施
6.
etch rinse processor
薄片腐蚀 冲洗装置
7.
Scanning electron microscopy analysis on blade fracture shows: the fracture is characterized by cleavage, quasi-cleavage and stress corrosion and so on.
对叶片断口扫描电镜分析显示,断口具有准解理、韧窝、力腐蚀等复杂特征。
8.
It emphases discussing the mechanism and application of preservative adding, forward curved vane and new erosion resistant structure of integrated shroud.
重点讨论了添加防腐剂、用前掠低压静叶片、型防侵蚀自带围带结构的工作机理和应用。
9.
Standard of test method for corrosion rate of buried steel
埋地钢质检查片腐蚀速率测试方法
10.
Industrial aromatic hydrocarbons--Test method of copper corrosion
GB/T11138-1994工业芳烃铜片腐蚀试验法
11.
Lubricating grease--Corrosiveness to copper--Copper strip test
GB/T7326-1987润滑脂铜片腐蚀试验法
12.
Petroleum products--Corrosiveness to copper--Copper strip test
GB/T5096-1985石油产品铜片腐蚀试验法
13.
Test for copper strip corrosion of engine fuels
GB/T378-1964发动机燃料铜片腐蚀试验法
14.
Each times are usually on the order of several minutes per batch.
每批片子每次腐蚀时间通常为几分钟。
15.
The Study of Silicon Etching in HF/HNO_3/H_2O System;
硅片在HF/HNO_3/H_2O体系中酸腐蚀的研究
16.
Protection of Chips in the Bulk-Si Etching in the MEMS Post-Processing;
MEMS后处理中体硅腐蚀的芯片保护
17.
Study on the Wet Anisotropic Etching Characteristics of (100)、(110) Silicon;
（100）、（110）硅片湿法各向异性腐蚀特性研究
18.
Comparison of various resistance of aluminized steel & other kinds of steel
镀铝(硅)钢片及其它种类钢片的抗腐蚀性能比较