1.
A METHOD FOR DESIGN OF SMALL BEVEL NOZZLE OF ROCKET ENG INES
火箭发动机小斜切角喷管的设计方法
2.
bevel the edges of, to make a miter joint.
斜切边缘，使成斜角拼接。
3.
To bevel the edges of for joining with a miter joint.
将端边切成斜角拼接
4.
give a sloping edge to(sth)
把（某物）切成或磨成斜边或斜角
5.
Angle cutter: Machine for cutting paper at an angle to the machine direction of the paper.
斜切裁纸刀:能把纸张斜切的机器。它的切线与纸纹方向成一角度。
6.
Calculation Method of Bevel Angle in Vent Pipe
排汽管斜切口出流偏转角的计算方法
7.
Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
8.
Abstract: Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.
文摘:斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。
9.
"Types of flat or angular moldings are the fascia, chamfer (or Bevel), and fillet (narrow Band)."
平面或角状线脚包括盘座面、斜切面(或斜角面)和方嵌条(窄带饰);
10.
Mitre: To cut the ends of rules at an angle of 45 degrees so that the corners fit flush to form a border.
斜切:排字用的铅线沿45度角切去，使花边的角位驳口对齐。
11.
Angle cut: To cut paper to special angles in order to avoid waste in the manufacture of enveloped.
斜角切:在制造信封时，把纸张作特别角度裁切，以减少损耗。
12.
STUDY ON THE OBLIQUE CUTTING OF WOOD--The Relations Between Cutting Forces And Bevel Angles of Cutting Edge
关于木材斜角切削的研究——切削力与刃倾角的关系
13.
Top view of bevel headed, hexagonal head set screw. Selection box represents thread diameter.
斜切六角螺钉的俯视图。选择框代表螺纹直径。
14.
All planar structures are represented by a strike line and dip angle.
一切面状构造均可用向线和倾斜角来表示。
15.
Three-dimensional thermo-elastic-plastic coupled finite element analysis for oblique cutting processes
斜角切削过程的三维热—弹塑性有限元分析
16.
The investigation of the distribution of stress inside a cutting tool in the chip flow plane during oblique cutting (II)
斜角切削切削刀具流屑平面内应力分布的实验研究(Ⅱ)
17.
tilting position
倾斜角(转炉)，倾斜位置
18.
Chamfered washer or spacer with adjustable inside and outside diameters and chamfer.
内径和外径以及斜面都可调整的切角垫圈或垫片。