1.
Condenser-to-Radiator Mounting Brackets
冷凝器至散热器固定托架
2.
Install caliper over rotor and into mounting bracket.
在转子上方安装夹制器至固定托架中。
3.
For fixing a pipe ,use saddles to fix the pipe to mortar roundation as below.
管路的固定可如下图使用固定托架在灰浆基础地板上固定。
4.
Remove the screws that secure the instrument panel wire harness trough to the airbag rear mounting bracket.
拆去固定仪表板线束槽到安全气囊后固定托架的螺丝。
5.
If necessary, remove bolts attaching bumper mounting brackets to frame.
如果需要，拆去连接保险杆固定托架到车架的螺栓。
6.
Reinforcement brackets are retained on frame sills with 4 studs.
用4个螺椿将加固托架固定在车架梁上。
7.
screw a bracket to the wall
用螺丝把托架固定到墙上
8.
The standard pipe rack configuration for this drill consists of a long pipe cradle that is fastened to a pair of paral-lelogram- type swing arms.
本钻机的标准管架配置由一个长管道托架组成，该托架被固定在两个平行四边形的旋臂上。
9.
stationary barrier
固定支架，固定挡块
10.
Position the door restraint in bracket with the holes aligned and insert the retaining pin.
用孔对齐方式将车门防护移至托架中并且插上固定销。
11.
The application value of self-made fixed arm bracket for intravenous injection on contrast enhancement
自制静脉注射固定托臂架在CT增强扫描检查中的应用价值
12.
Modification for Spindle Support of Temper Mill;
对平整机万向接轴托架的改造—由固定式改为浮动式
13.
BRACKET MOUNTING NUTS
支架固定螺帽（2）
14.
A bracket on the spring shackle of a motor vehicle, designed to hold it to the chassis.
弹簧吊架机动车辆弹簧装置上的托架，目的是为了把它固定在底盘上
15.
Mount: The base on which a letterpress printing plate is fixed.
版托:承托及固定活版版块的基片。
16.
Straightly Stand on Wooden Pallet and Wrapped with Fibre Broad, Plastic Membrane& Kraft Paper Board Bound with iron Belts Externally and Then Mounted in the Container with Iron Belt.
木托架包装，用纤维板、料薄膜及瓦楞纸皮包裹，外用铁带捆扎，再用铁带固定于集装箱内。
17.
Using a short piece of pipe and Holder 6958 to hold the pinion yoke, or pinion flange, remove the pinion nut and washer.
用短管和托架6958固定小齿轮轴轭或小齿轮凸缘，拆下小齿轮螺帽和垫圈。
18.
The towel rack screws to the wall.
毛巾架固定在墙上。