1.
Analysis and Disposal on Crack Causation of Exhaust Pipe to Steam of High Temperature Reheater Output Pipe
高温再热器出口管道对空排气管座裂纹原因分析及解决措施
2.
Disconnect the exhaust pipe at the exhaust manifol
断开排气歧管的排气管。
3.
The pump exhaust should lead to the open air or a fume hood.
抽气泵的排气管应该导向室外空旷处或导向一座通风橱。
4.
The gas-tight seal takes place between the nipple and the valve outlet seat at a very small contact circle where they touch.
不漏气的密封形成在管接口和阀门排气口座之间，在它们接触的一个非常小的接触圆周处。
5.
Disconnect the exhaust pipe at the engine exhaust manifol
拆开引擎排气歧管处的排气管。
6.
Connect the exhaust pipe to the hanger and to the engine exhaust manifol
连接排气管到悬挂物、到引擎排气歧管。
7.
Exhaust Down Pipe to Front Exhaust Pipe
排气下行管道到前排气管道
8.
The gases pass into the exhaust manifold.
这些废气进入排气歧管。
9.
Disconnect exhaust pipe at manifol
在歧管处断开排气管。
10.
Disconnect the exhaust pipe from the exhaust down manifold (refer to Group 11, Exhaust system and Intake Manifolds).
从排气下行管断开排气管（请参阅第11单元“排气系统和进气歧管”）。
11.
The basic exhaust system consists of an engine exhaust manifold, exhaust pipe, exhaust heat shield(s), muffler and exhaust tailpipe
基本排气系统包括一个引擎排气歧管、排气管道、排气隔热罩、消音器和排气尾管
12.
The exhaust gas exits through the other exhaust manifold.
废气经另外一个排气歧管排出。
13.
Connect the exhaust down pipe to the exhaust system refer to Group 11, Exhaust System and Intake Manifol
连接排气下行管到排气系统，请参阅第11单元“排气系统和进气歧管”。
14.
exhaust manifold heat control valve
排气歧管热量控制阀
15.
Remove exhaust manifold heat shiel
拆下排气歧管隔热罩。
16.
Install the exhaust pipe support.
安装排气管支撑物。
17.
My car needs a new exhaust.
我的汽车该换排气管了.
18.
Install exhaust down pipe heat shiel
安装排气下行管隔热罩。