1.
Brazing of SiC Ceramics Using Ag-Cu-In-Ti Filler Metal
采用Ag-Cu-In-Ti焊料连接碳化硅陶瓷
2.
Joining of Recrystallized SiC Ceramic Using Ni-Cr-Nb Powders as Filler
采用Ni-Cr-Nb焊料连接再结晶SiC陶瓷
3.
Heat solder joints only to the point were solder will flow properly. Excessive heat may distort brass castings.
热焊料连接只能用在焊料能够正确流动的地方。过热可能扭曲黄铜铸件。
4.
solder together by using hard solder with a high melting point.
用高熔点的焊料来连接。
5.
Study on the Process and Mechanism of Diffusion Welding between Contact and Solder;
触头焊料扩散连接的工艺及机理研究
6.
Remove excess solder with small brush while plastic( soft), leaving a fillet around end of valve as it cools.
在焊接部分成型后，用小刷子清除多余的焊料，使其在焊料冷却后形成一个环绕连接端口的圆角。
7.
The Manufacturing of Filler Metal and the Joining of TiAl Alloys;
TiAl基合金高温钎焊钎料配制及连接工艺研究
8.
openings through welded joints
通过焊接连接处的开孔
9.
Wrot copper performs well in high temperature applications and is easily joined by soldering or brazing. Wrot coper is exclusively used for fittings.
在高温环境下,铜也表现很好,而且易于通过焊接或钎焊进行连接。铜专门用作配件材料。
10.
A Study of Brazing Process and Mechanism of Si_3N_4 Ceramic Using High-Temperature Filler Alloy;
高温钎料钎焊氮化硅陶瓷的连接工艺及机理研究
11.
Effect of the Addition of Al or in on the Microstructural Formation of Sn-Ag-Zn Solder and the Exploration of the Soldered Interface;
Al、In对Sn-Ag-Zn焊料组织形成的影响及连接界面的研究
12.
Formation and Evolution of the Microstructures of the Sn-Ag-Zn Solders and the Interfaces with Cu Pad
Sn-Ag-Zn系无铅焊料及其连接界面组织形成与演化规律
13.
TFE disc valves limite to450 oF temperatures.
焊接连接端口阀门温度限制在不影响焊接连接端口的强度范围内。
14.
Study of the Reliability of Power Device with Lead-free Heat-sink Attachment;
功率器件无铅焊料焊接层可靠性研究
15.
Affect of Different Solder on Intension of Cu/W Brazing Joint
不同焊料对Cu/W钎焊接头强度的影响
16.
A resin material used in soldering electrical connections.
焊接电气连接点时使用的松香之类的助焊剂。
17.
Discussion on Strip Butt-welding Method of CT80 Grade Coiled Tubing Made in China
国产CT80级连续油管用钢带对接焊焊接方法探讨
18.
There has been a trend toward using anisotropical conductive adhesives (ACAs) to replace alloy solder because of its low cost and advantageousness to environment.
利用成本低、环保性能好的导电胶来替代合金焊料已经成为连接材料研究的热点。