1.
The melting sticking occurred when the melting point of materials is lower than the drying temperature.
物料熔点低于干燥温度时容易产生热熔性粘壁。
2.
Study on the Fly Ash Melting Property and NOx Emission at High Temperature
飞灰高温熔融过程中灰熔性及NOx排放特性的研究
3.
Research on Microstructure and Performance of High Hardness Ni-based Self-Fluxing Alloy after Flame Remelting
火焰重熔高硬度镍基自熔性合金组织及性能研究
4.
Influence of Flux Injection Through Tuyeres on Burden Softening-Melting Properties and Primary Slag Properties
从风口喷吹熔剂对炉料软熔性能和初渣性能的影响
5.
CHANGE OF THE MICROSTRUCTURE AND ITS EFFECT ON THE SOFTENING-MELTING PROPERTY DURING THE SOFTENING-MELTING PROCESS OF SWEDISH PELLETS
瑞典球团矿在软熔过程中的显微结构变化及其对软熔性能的影响
6.
Study on Microstructure and Performance of Ni-SiC Cladding by Argon Arc Cladding
氩弧熔覆Ni-SiC熔覆层组织与性能研究
7.
Research on Properties of Al_2O_3-CaO Slag
Al_2O_3-CaO熔渣性能的研究
8.
Research into Protection Characteristic of No-silver Fuse-links of Drop-out Fuse
跌落式熔断器无银熔断件保护特性的研究
9.
Study on Improving the Fusibility of Shenhua-coal-ash;
提高神华煤灰熔融温度和熔融性的研究
10.
Research of Technology and Properties of Laser Cladding on Ni/Wc-La_2O_3 Surface of T10 Steel
T10表面激光熔覆Ni/WC-La_2O_3工艺与熔覆层性能研究
11.
Study on the Characteristics of Molten Pool Based on Inside-Ring Laser Coaxial Powder Feeding and Properties of Cladding Layers
环形激光光内送粉熔池特征与熔层性能
12.
Experimental Study on Melting Properties for CaO-Al_2O_3-MgO Slag System with Low-melting-point Zone
CaO-Al_2O_3-MgO渣系低熔点区熔化性能的实验研究
13.
Properties of Laser Cladding on Ni 60-La_2O_3 Surface of T10 Steel
T10钢表面激光熔覆Ni60-La_2O_3熔覆层性能研究
14.
Effect of Laser Cladding Processing Parameters on Microstructure and Properties of Cladding Layer
激光熔覆工艺参数对熔覆层组织和性能的影响
15.
Hydrogen Storage Properties of La_2Mg_(17) Alloy Prepared by a Smelting Method with Protection by Molten Salt
熔盐保护熔炼法制备La_2Mg_(17)合金及其储氢性能
16.
EFFECT OF MAGNESIUM-BASED FLUX ON THE MELTING CHARACTERISTICS OF COAL ASH FROM COAL BLENDS USING THE LIUQIAO No.2 COAL MINE
镁基助熔剂对刘桥二矿混煤灰熔融特性的影响
17.
A STUDY OF RHEOLOGICAL PROPERTIES OF MOLTEN POLYETHYLENE TEREPHTHALATE--Part Ⅱ:Rheological Properties of PET Melt at High Shear Rate
聚酯熔体流变性能的研究——高剪切速率下熔体的流变性能
18.
Effect of Fusing Agent on Ash Fusion Characteristic and Slag Viscosity of Huainan Coal;
助熔剂对淮南矿区煤灰熔融特性及粘温特性的影响