1.
Hardness was decreased after maximum by high temperature heating.
高温加热硬度达最大硬度以后保温硬度降低。
2.
MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS
高强度钢中绝热剪切带的组织和硬度
3.
a hard natural coal that burns slowly and gives intense heat.
一种硬质的天然煤，燃烧缓慢，热度强。
4.
hardness testing methods for rubber, vulcanized or thermoplastic
硫化橡胶及热塑橡胶硬度试验方法
5.
Effect of Heat Treatment on Hardness of 9Cr2Mo Steel
热处理工艺对9Cr2Mo钢硬度的影响
6.
Effect of heat treatment processes on microstructure and hardness of GCr18Mo steel
热处理工艺对GCr18Mo钢组织及硬度的影响
7.
Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested.
测试了喷涂层的结合强度、硬度以及抗热震性能。
8.
Influence of Heat Treatment Temperature on Microstructure and Micro-hardness of Deposited Metal
热处理温度对熔敷金属组织及其硬度的影响
9.
Effects of peak temperature of welding thermal circle on hardness of 10CrMo910
焊接热循环峰值温度对10CrMo910钢硬度的影响
10.
the obvious microhardness increase results from the formation of hardened TiC phase.
热处理后薄膜显微硬度显著升高的原因是生成了碳化钛硬化相.
11.
Thermal sprayed metallic coatings--Rockwell hardness test
GB/T8640-1988金属热喷涂层表面洛氏硬度试验方法
12.
"(10~100IRHD) Rubber,Vulcanized or thermoplastic--Determination of hardness (hardness between 10 IRHD and 100IRHD)"
GB/T6031-1998硫化橡胶或热塑性橡胶硬度的测定
13.
Influence of Heat Treatment Hardness on the Character of Automobile Clutch Film Spring
热处理硬度对汽车离合器膜片弹簧性能的影响
14.
Effect of Heat Treatment on Micro-Hardness of Ni-ZrO_2 Nano-Composite Electroforming Deposits
热处理对Ni-ZrO_2纳米复合电铸层显微硬度的影响
15.
Effect of heat treatment on microstructure and hardness of monel alloy containing silicon
热处理对含Si蒙乃尔合金组织及硬度的影响
16.
Hardness Decreasing Reason of Airscrew Bush Parts of Helicopter after Heat Treatment
直升机旋翼桨根衬套热处理后硬度降低的原因
17.
Influence of arc spraying parameters on the property of hardness of Ni-Cr-Al coating
热喷涂工艺对Ni-Cr-Al涂层硬度性能的影响
18.
Clear, low viscosity, one-component, rigid, heat cure epoxy system which exhibits high heat resistance.
透明的低粘度单组分加热固化环氧树脂，坚硬，高抗热性。