1.
Remove transmission crossmember bolts, and lower rear of engine.
拆卸变速箱横梁螺栓，并降低引擎后部。
2.
The cross girder center segments of the bents were field bolted.
构架横梁的中间段在工地用螺栓连接。
3.
EFFECTS ON SEISMIC STRENGTHENING OF COUPLING BEAMS WITH OR WITHOUT BOLT CONNECTIONS IN BEAM SPAN
连梁抗震加固中梁跨内有无螺栓连接的影响
4.
"Bolts,screws & nuts"
"螺栓,螺丝及螺帽"
5.
Position plate bracket and install attaching bolts through vehicle rear crossmember.
定位板托架并穿过车辆后横梁安装附接螺栓。
6.
Research on Some Issues of Extended End-Plate Beam-to-Column Bolted Connections;
梁柱外伸端板螺栓连接中若干问题研究
7.
Research on the Performance of Steel Channels as Stiffeners in Bolted End-plate Beam-to-column Connections;
槽钢加劲肋在梁柱端板螺栓连接中的性能研究
8.
Extended End-plate Bolted Connections Performance Study of Steel Frame Structure;
钢结构梁柱外伸式端板螺栓连接节点性能研究
9.
The Analysis of Behavior of Beam-to-Column Web Moment Connections with Bolted-Splicing in Steel Frame;
钢框架梁柱腹板螺栓连接的节点性能分析
10.
Collapse Mechanism and Design Advice of Bolt-Angle Beam-to-Colunm Connections under Static Load;
螺栓—角钢梁柱连接的破坏机理及设计建议
11.
The Seismic Behavior Analysis of Steel Frame Beam-to-Column Web Connection with Bolted-Splicing
钢框架梁柱弱轴螺栓拼接节点的抗震性能分析
12.
double-screw bolt
螺柱，双头螺纹螺栓
13.
Remove bolts holding front of suspension crossmember to frame rails under upper control arms.
卸下将悬吊横梁前部紧固到上控制臂下面的框架轨道的螺栓。
14.
Install bolts holding front of suspension crossmember to frame rails under upper control arm.
安装将悬吊横梁前部紧固到上控制臂下面的框架轨道的螺栓。
15.
Use a universal puller to separate the ball stud from the frame rail bracket.
用万能拉出器将圆头螺栓从车架横梁支架上拆下。
16.
The Research for the High and Strong Stud Bolt Joint of Steel Beam and Concrete Wall with Inside Covering up Profiled Bar
钢梁与内埋型钢混凝土墙高强螺栓连接节点的研究
17.
Effect of End-plate to End- plate CFT- H Connection and Calculate Method of Bolt Tension
端板厚度对钢管混凝土端板梁柱节点的影响及螺栓力计算方法
18.
The Investigation on Cold-Formed Thin-Walled Steel Beam-Column Joints of Connections with Bolt-Plate;
冷弯薄壁型钢梁柱钢板—螺栓连接节点的影响因素分析