1.
Open speed sensor ground circuit
断路的感知器接地电路
2.
REPAIR THE OPEN GROUND CIRCUITS.
修理断开的接地电路。＊
3.
REPAIR THE OPEN HCU GROUND CIRCUITS.
维修断开的ＨＣＵ接地电路。＊
4.
PROBE THE CAB GROUND CIRCUIT, CAB CAVITY 1
探测ＣＡＢ接地电路，ＣＡＢ孔１１。
5.
MEASURE THE VOLTAGE AT THE SPEED SENSOR GROUND CIRCUIT IN TRS CONNECTOR.
测量速度感知器接地电路电路ＴＲＳ接头中的电压。
6.
REPAIR THE OPEN AMPLIFIER GROUND CIRCUIT.
维修断路的扩大器接地电路。＊
7.
An earth circuit must be installed; dispersion resistance to earth must not exceed20 Ohums.
必须装接地电路......电阻不得超过20欧姆.
8.
BACKPROBE A JUMPER WIRE BETWEEN THE GROUND CKT AND GROUN
检测接地电路和地之间的跳线。
9.
REPAIR THE BATTERY TEMP SENSOR SIGNAL CKT FOR A SHORT TO THE SENSOR GROUND CIRCUIT.
修理电池温度感知器信号电路的局部对感知器接地电路短路问题。＊
10.
CONNECT A JUMPER WIRE BETWEEN SEAT BELT SWITCH SENSE CKT AND BODY GN
在安全带开关感知电路和接地电路之间连接一跳线。
11.
WITH THE DRB IN OHMMETER MODE, MEASURE THE GROUND CIRCUIT.
用ＤＲＢ的欧姆计模式，测量接地电路。
12.
PROBE THE GROUND CIRCUIT IN CAB CAVITIES 11, 12 AND 2
探察ＣＡＢ槽１１，１２和２４中的接地电路。
13.
To connect(an electric circuit)to a ground.
使接地将（电路）接于地上
14.
grounded collector amplification circuit
集电极接地放大电路
15.
grounded collector equivalent circuit
集电极接地等效电路
16.
grounded emitter amplification circuit
发射极接地放大电路
17.
grounded-grid-triode circuit
栅极接地式三极管电路
18.
ground emitter equivalent circuit
发射极接地等效电路