1.
The Position Vector Field of a Special Curved Surface with Equal Principal Curvature Function in the 3-Dimentional Minkowski Space;
三维Minkowski空间中有相等主曲率函数的一类特殊曲面的位置向量场
2.
Position the seatback in the full forward or full recline position.
在尽量向前或倾斜的位置安置座椅。
3.
Position Prediction Routing Protocol for VANET Based on Velocity Vectors
基于速度向量的VANET位置预测路由协议
4.
Error Analysis of Axial Position and Measuring Equipment Design for NC Machine Tool
数控机床轴向位置误差分析及测量装置设计
5.
To place in a prone position.
使倒伏置于向下的位置
6.
Research of Replica Location and Replica Placement for Massive Data;
面向海量数据的副本定位与副本放置技术研究
7.
Determination on the Spatial Relation of Straight Lines Presented by the Vector-type Parametric Equations;
向量式参数方程所表直线位置关系的判定
8.
Analysis of position and gesture of robot based on complex vector principle;
基于类复向量原理的机器人位置和姿态分析
9.
The maximum amount of oil is reached when marker dot A is brought to the position just opposite from the needle bar crank 3 by turning the adjust pin in direction C.
从图上所示的位置向C方向转动，当转到与针杆曲轴3的正对面的位置时，油量为最大。
10.
A position facing or commanding a given direction; exposure.
方位座向面临或朝向一指定方向的位置；方位
11.
The direction or position on the left side.
左方左边的方向或位置
12.
Situated toward the northwest.
西北的位置向西北的
13.
moving toward a position ahead.
向前移动到某个位置。
14.
To advance the reading or display position according to a prescribed format, for example, to advance the printing or display position horizontally to the right or vertically down.
根据规定的格式，推进读出位置或显示位置，例如横向向右或纵向向下推进打印位置或显示位置。
15.
The Error Analysis on Position,Velocity and Acceleration of Space Four-bar Linkages by Means of Complex Number Vector
空间四杆机构位置、速度和加速度误差分析的复数向量法
16.
The Effect of the Movement Direction of Attention in Cue-presentation Phase and the Number of Target Position on the Inhibition of Return;
线索化阶段注意移动方向及靶子位置数量对返回抑制的影响
17.
Position Sensorless Control for Switched Reluctance Motor Based on Support Vector Machine;
基于支持向量机的开关磁阻电机无位置传感器控制
18.
Diagnostic approach to detect rub-impact fault of shaft based on sphere support vector machines
球结构支持向量机在转轴碰摩位置识别中的应用