1.
Wetted parts: All Austenitic stainless steel and Stellite 6.
接触液体的部件：奥氏体不锈钢和钨铬钴合金6。
2.
Wetted parts: All Austenitic stainless steel and/or Stellite 6. Bronze wedges available.
接触液体的部件：全部都是奥氏体不锈钢和/或钨铬钴合金6。也可提供青铜楔板。
3.
Contact angle: The angle made by a drop of liquid with a solid at the point of intersection.
接触角:一滴液体和固体接触时所造成的角度。
4.
Avoid direct contact with the carcass, blood and body fluid discharged from the dead bird.
避免接触死禽的死体、、从死体中流出的任何液体。
5.
Progress in Direct-Contact Heat Transfer Between Immiscible Liquids
不互溶液体间直接接触传热的研究进展
6.
The liquid surface is not distorted upon contact with the solid.
液体与固体接触时液体表面不受干扰。
7.
Never allow any unprotected part of your body to touch uninsulated pipes or vessels containing cryogenic liquids.
禁止允许你的身体的任何未受到保护的部分接触不隔热的装有低温液体的管道或容器。
8.
The wetting of a solid surface is understood to be the condition resulting from its contact with a specified liquid under specified conditions.
一个固体表面的润湿，是指它同特定的液体，在特定条件下接触的状态。
9.
All parts are accessible from the top for easy servicing.
从阀门顶部能够接触到所有的部件，便于维修。
10.
liquid-liquid centrifugal contactors
液--液离心接触器
11.
FINITE ELEMENT CONTACT ANALYSIS OF CYLINDER COVER AND CYLINDER HEAD BASED ON ABAQUS SOFTWARE
基于ABAQUS软件的液缸盖与液缸头接触有限元计算分析
12.
All interior surfaces exposed to piped liquid are stainless steel. Full stainless gasket surfaces.
所有与管道输送液体接触的内部表面都是不锈钢。全不锈钢密封垫表面。
13.
The surface roughness of the stainless steel components and corner parts touching the fluid is less than0.5μ m， which comes up to the GMP Standard.
所有与流体接触的不锈钢部件表面及弯角部分的粗糙度均达到0.5μ，符合GMP标准。
14.
On the Effect of Line Tension on Contact Angle of Liquid Dropte-solid
关于线张力对液滴-固体接触角的影响问题
15.
machinery part not containing electrical connectors, insulators, coils, contacts or other
机械零件,不含有电气插座、绝缘体、线圈、接触器或其他电气部件
16.
Stage 2A: Partial opening of roof, focal itreous attachment to flap.
部分开放的盖形成瓣状，局部玻璃体与瓣接触。
17.
Only a few people have access to the full facts of the case
只有少数人接触到这件案子的全部事实。
18.
Catenary System Reliability Analysis Design and Manufacture;
接触网系统零部件的可靠性设计与制造