1.
hydromechanical drive rotary torque
液压-机械驱动转盘扭矩
2.
A change, usually an increase in rotary torque due to stress relieving as the mud weight overbalance gradually decreases.
由于钻井液密度逐渐下降失去平衡，应力消除，通常会使转盘扭矩上升。
3.
The adaptor of rotary torque sensor is subject to damage.
转盘所扭矩传感器接头容易被破坏。
4.
static torque calibuation stand
转矩[扭矩] 静校台
5.
Research on inverted torque slowness release technology of independence electric drive rotary system
转盘独立电驱动系统反扭矩缓释技术研究
6.
Qualitatively, a torque is a "twist".
定性地说，转矩就是扭转。
7.
automotive steering where engineer power amplifies the torque applied to the steering wheel.
发动机能量扩大扭矩在方向盘的应用的汽车转向系。
8.
"TORQUETorque is twisting, or turning, effort, Torque, however, must not be confused with power."
扭矩:扭矩是旋转作用力或回转作用力。扭矩绝不能与功率相混淆。
9.
steering gear max. Output torque
转向器最大输出扭矩
10.
Exchange of Twisting Moment is Angle of Twint Curve for Cylinder Ipecimen of Plastic Metal with Various Diameter;
不同直径塑性金属圆轴扭转试验的扭矩——扭转角圆的相互转换
11.
To preserve the same twist, the torque should also be the same.
为保持相当的扭转，扭矩也应该具有相同的比例。
12.
Research on Testing Technique of Dynamic Torsion Moment and Twist Vibration on Revovling Component Bench
旋转构件实验台动扭矩及扭振测试技术研究
13.
Torque is the rotary effort required to operate a valve.
扭矩是操作阀门所需要的旋转作用。
14.
bit-pinching formations
钻压略重就扭矩增大转速减慢的地层
15.
Torque is a measure of the ability of an applied force to produce a twist.
力矩是作用力产生扭转能力的量度。
16.
A New Torsional Stiffness Matrix of Thin-Walled Bar Elements
一种新的薄壁杆件单元扭转刚度矩阵
17.
Calculation and Test Research on Torque of Cutter Head for Earth Pressure Balance Shield Tunneling Machine
土压平衡式盾构机刀盘扭矩的计算及试验研究
18.
Torque calculation model of cutting head in shield machine and experimental study
盾构刀盘驱动扭矩计算模型及实验研究