说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 套焊
1.
The backing plate shall be welded with matching electrodes so that the weld on the clad side is flush with the backing plate surface.
底板用配套焊条焊接,使复层侧的焊缝与背衬板表面齐平。
2.
Improved 14MnVTiRE Steel Electrode Mechanical Properties and Microstructure
14MnVTiRE钢配套焊条的改进及性能与组织
3.
A set of Internet address of welding learned society and research organizatin is provided.
提供了一套焊接学术团体及研究机构的Internet网址;
4.
a welder's outfit.See Synonyms at equipment
焊工的全套工具参见
5.
apply brazing wire or rod at point where tube enters valve socket.
将焊线或焊杆点在阀门里的管道套座上。
6.
Determination of Residual Stress Distribution in ERW Casing
电阻焊直缝焊接套管残余应力分布的测定
7.
The assembly department is having more than 20 assembly lines, 3 sets of bonding machines and 20 sets of ultrasonic welding machines.
装配部有20多条装配线,3套压焊机械和20套超声波焊接机械。
8.
Silver Brazing Method: Apply brazing wire or rod at point where tube enters valve socket.
银钎焊法:将焊线或焊杆点在阀门里的管道套座上。
9.
Loose plate steel flanges with copper alloy plate collar for brazing or welding
GB/T15530.5-1995铜合金平焊环松套板式钢法兰
10.
Weld male connector-Assembly
GB/T3747.1-1983卡套式焊接管接头
11.
Weld male connector--Body
GB/T3747.2-1983卡套式焊接接头体
12.
Loose plate steel flanges with copper alloy welding neck collar
GB/T15530.6-1995铜合金对焊环松套板式钢法兰
13.
Research on Longitudinal Seam Leaser Welder for Reactor Coolant Pump Can
核主泵屏蔽套激光纵缝焊接机的研制
14.
A welder's kit contains electrode holder, welding torch, helmet shield, portable electrode heating box and temperature measuring pen.
一名焊工的成套工具包括焊钳、焊炬、面罩、手提式焊条加热箱和测温笔。
15.
Specially suitable for zinc patching of weld seam in tube welding line, and capacitor spray.
本套设备适合于高频焊管生产线上进行焊缝的补锌及电容喷涂。
16.
Automobile Vehicle Bridge Welding Equipment of Axle Tube and Transitional Flange for PLC Control and Welding Procedure;
汽车车桥半轴套管、过渡接盘焊接设备PLC控制及焊接工艺
17.
Loose plate steel pipe flanges with welding neck collar with raised face for PN 2.5MPa (25 bar)
GB/T9120.1-1988PN2.5MPa(25bar)凸面对焊环松套板式钢制管法兰
18.
Loose plate steel pipe flanges with welding neck collar with raised face for PN 4.0MPa (40 bar)
GB/T9120.2-1988PN4.0MPa(40bar)凸面对焊环松套板式钢制管法兰