1.
steel weldless eye nut
钢制整体式环首螺母
2.
recirculating ball and nut steering gear
循环球和螺母式转向器
3.
ANALYSIS OF STRAIN FIELD FOR ROLLING PROCESS OF HIGH-TYPE STEEL SPIRAL FINNED TUBE
整体型钢质高螺旋翅片管轧制过程应变场分析
4.
Integral steel pipe flanges with ring-joint face for PN 5.0MPa(50bar)
GB/T9113.22-1988PN5.0MPa(50bar)环连接面整体钢制管法兰
5.
Integral steel pipe flanges with ring-joint face for PN 42.0MPa (420 bar)
GB/T9113.26-1988PN42.0MPa(420bar)环连接面整体钢制管法兰
6.
Integral steel pipe flanges with ring-joint face for PN 25.0MPa (250 bar)
GB/T9113.25-1988PN25.0MPa(250bar)环连接面整体钢制管法兰
7.
Integral steel pipe flanges with ring-joint face for PN 10.0MPa (100 bar)
GB/T9113.23-1988PN10.0MPa(100bar)环连接面整体钢制管法兰
8.
Integral steel pipe flanges with ring-joint face for PN 15.0MPa (150 bar)
GB/T9113.24-1988PN15.0MPa(150bar)环连接面整体钢制管法兰
9.
Integral steel pipe flanges with ring-joint face for PN 2.0MP(20 bar)
GB/T9113.21-1988PN2.0MPa(20bar)环连接面整体钢制管法兰
10.
Nuts are full steel self locking eliminating temperature and moisture influence.
螺母采用全钢制自锁紧式，消除了温度以及湿度的影响。
11.
All floor-mounted cabinets are supported on four leveling screws that are adjustable from access in toe base.
所有地面安装式柜体均由4个可调螺丝支撑，由踢脚板开口处调整螺母以调节台面水平。
12.
Microstructure and Properties of Loop Projection Welding Joint Between Large-Diameter Screw Nut and Electrogalvanizing Thin Steel Plate
厚大螺母与镀锌薄钢板环凸焊接头组织与性能
13.
Attach the regulator. Fasten the regulator to the cylinder and tighten the inlet nut securely.
连接调整器。把调整器紧固在钢瓶上，安全地上紧入口螺母。
14.
threaded type track bolt nut chuck
螺纹式轨道螺母夹头
15.
inserted nut abrasive discs and inseted nut ring wheels
带螺母砂盘和带螺母环形砂轮
16.
spring seat bearing adjusting nut
弹簧座轴承调整螺母
17.
wheel hub bearing adjusting nut
车轮毂轴承调整螺母
18.
steering gear adjusting nut lock
转向齿轮调整螺母保险