1.
Development of E-Shaped Double-Sided Active Sealing Flange Seal Ring for the Braking Pipeline System
制动管系用E形双面主动密封法兰密封圈的研制
2.
Optional mounting configurations (clamp, flange, plate) and tank sealing solutions (packed, mechanical, lip) are available upon request.
可提供多种安装结构（卡盘式，法兰式，板式）和槽罐密封形式（填料密封，机械密封，油密封）。
3.
Marine pipe flanges--Connection dimensions and mating face
GB/T569-1965船用法兰连接尺寸和密封面
4.
Press the flange and replace the side sealing ring.
压紧法兰（均匀用力）更换侧密封圈。
5.
Ultra-high vacuum flange--Copper seal gaskets
GB/T6071.3-1985超高真空法兰用铜密封垫
6.
Test method for sealing characteristics of gaskets for pipe flanges
GB/T12385-1990管法兰用垫片密封性能试验方法
7.
Pipe flanges for ordinary use--Sealing surfaces--Forms and dimensions
GB/T2556-1981一般用途管法兰密封面形状和尺寸
8.
The Research on the On-line Repairing Technology of Flange Sealing-face of Lage-sale Pressure Vessel;
大型压力容器法兰密封面在线修复技术的研究
9.
3 t Electro-hydraulic Hammer Master Cylinder Flange Sealing Technology Components to Improve
3t电液锤主缸法兰组件密封的技术改进
10.
DISCUSS ON FLANGE SEAL SURFACE SELECTION OF PRESSURE VESSEL IN DESIGN
压力容器设计中管口法兰密封面选择的探讨
11.
Application of Shape Memory Alloys in Bolted Flanged Connections
形状记忆合金在法兰密封连接中的应用
12.
Analysis of Corrosion on Flange Surface of RPV for NPP
核电站反应堆压力容器法兰密封面腐蚀机理的分析
13.
Add sealed shim between the two flanges and then lock down the bolt.
安装时两法兰间需加密封垫片，然后均匀拧紧螺栓。
14.
testing methods for sealant for automobiles
汽车用密封剂试验方法
15.
Waterproofing and sealing of shield tail and sealing grease
盾构法隧道的盾尾防水密封与盾尾密封油脂
16.
Apply silicon sealer/lubricant to the inner and outer diameters of the flange kit gasket, and press the gasket onto the valve body end.
将硅密封/润滑剂施加在法兰组件垫圈的内径和外径上，将垫圈压在阀体端口上。
17.
The valve can be installed in horizontal or vertical. Add seal cushion between two flanges connection and screw down bolt.
本阀可水平或垂直安装，安装时两法兰连接中间必须加密封垫片，然后均匀锁紧螺栓。
18.
Pay attention to the flow direction of medium marked on the body. Add the sealed shim between the two flanges and then screw down the bolt.
安装时请注意闸门本体上标明介质流向。两法兰连接时必需加密封垫片，然后均匀锁紧螺栓。