1.
roller slewing ring
滚子夹套式回转支承
2.
The numbering of Rotary Fulcrum bearing (The StandardJB2300-84)
回转支承代号编制方法(JB2300-84)
3.
Contact stress anslysis of rotary-support component under tractive rolling contact
回转支承构件牵引滚动接触应力解析
4.
Research on fracture diagnosis and prevention of slewing bearing's high strength bolt
挖掘机回转支承螺栓断裂分析与预防
5.
Fracture diagnosis and prevention of excavator slewing bearing high strength bolt
挖掘机回转支承螺栓断裂诊断与预防
6.
LabVIEW Based Design for a Measurement System of Slew Rings
基于LabVIEW的回转支承测试系统设计
7.
Enabling technologies for new rotary support device of ultra-large-scale rotary floating cranes
超大型全回转浮吊新型回转支承装置关键技术的研究
8.
Research on Dynamics Simulation of the Electric Shovel Swing Bearing;
矿用挖掘机回转支承的动力学特性仿真研究
9.
Study on the Large 131.50.3550 Three-rows-roller Rotative Bearing;
131.50.3550型三排滚柱式回转支承的研究与开发
10.
The FEA on the Slewing Frames of Tower Crane;
塔式起重机回转支承系统的有限元分析
11.
Wheel pressure simulative calculation and actual measuring verification of 7500t floating crane turning support
7500t浮吊回转支承轮压仿真计算与实测验证
12.
Design Point for Antenna Vehicle Platform With Leveling Jacks
带水平回转支腿的天线车平台设计要点
13.
Grinding Wheel Truing for the Slewing Ring's Ball Track Grinding in Relation to Wind Energy Turbines
风电回转支承滚道切入磨削的砂轮修形
14.
Fault diagnosis and repair technique of the large-scale slewing bearing
大型回转支撑轴承故障检测及修复工艺
15.
Numeral Device for Examination of the Measuring Rod in Slewing Bearing
数字式回转支承滚道直径测量杆比对装置
16.
The Research of Large-diameter Antifriction Bearing s Trouble Mechanism and Diagnosing Technology of Trouble;
大型回转支承装置故障机理及故障诊断技术的研究
17.
Key Technology and Realization of the Instrument for Signal Collection;
大型回转支承故障检测仪若干关键问题的分析研究
18.
Optimum Supporting Angles of Kiln Wheel to Wheel Belt--A FEM Optimization
回转窑托轮对轮带最佳支承角的有限元优化