1.
Equally effective in checking back flows from head pressure on the discharge or suction sides of pump.
无论是泵的排泄口的排出压力，还是泵的吸入口，其流体止回的效果都是相同的。
2.
The result certifies that the suction system design is reasonable.
结果表明：给水泵吸入口系统设计是合理的。
3.
inspiratory port of circle absorption system
环流吸收系统的吸入口
4.
Suction piping for all pumps shall have at least five(5) times the nominal pump suction flange diameter of straight pipe upstream of the suction nozzle.
所有水泵的吸水管道直径至少应有5倍于吸入口的上升直水管段的额定边缘直径。
5.
Calculation of Inlet Absolute Pressure of Water-circle Vaccum Pump
水环真空泵选型设计中泵入口绝对压力的计算
6.
Effects of different inlet designs on the water surface in a pump sump
不同结构进口对水泵吸水池自由液面的影响
7.
Experimental research on measuring the output of piston pump based on suction volumetric efficiency
基于吸入容积效率实测活塞泵排量的实验研究
8.
Calculation Method of Site Measured Piston Pump Discharged Volume Base on Inhaled Volume Efficiency
基于吸入容积效率实测活塞泵排量的计算方法
9.
Respiration Assist by Pumpless Extracorporeal Oxygenation to ARDS Induced by Inhalation of Perfluoroisobutylene;
无泵型体外膜肺氧合对吸入全氟异丁烯所致ARDS的呼吸辅助
10.
The waste acid of 40~55% concentration is pumped into a boiling-bed roaster and roasted in the boiling bed.
将浓度为40～55%的废酸用泵打入焙烧入口,进入沸腾炉的沸腾层焙烧。
11.
The Experiment Research and Numerical Calculation of Vortek Field of Pump Inlet;
泵入口侧涡量场的实验研究与数值计算
12.
Experimental Study on the Flow Pattern of Open Pump Intake under Non-uniform Coming Flow;
非均匀来流开敞式水泵吸水口前流动的试验研究
13.
The accelerator pump injected fuel into the inlet air when the throttle was opened suddenly.
节流阀突然打开时,加速泵将更多的燃油喷入吸进的空气中。
14.
Objective To investigate the efficacy of inhalation therapy with air compressor pump in the treatment of bronchiolitis.
目的观察空气压缩泵吸入治疗毛细支气管炎的疗效。
15.
Objective: To observe the curative effect of ventolin atomizing pump inhalation in treating pediatric asthma and pneumonia.
目的:观察全乐宁雾化泵吸入治疗小儿哮喘及肺炎喘息的疗效。
16.
Objective To Compare the clinical effect between continuous airway moistening via syringe pump and inhalation therapy via ultrasonic nebulizer.
目的比较微量注射泵持续气道湿化和超声雾化吸入法的临床效果。
17.
End-suction centrifugal pumps--Dimensions of cavities for mechanical seals and for soft packing
GB/T5661-1985轴向吸入离心泵机械密封和软填料用的空腔尺寸
18.
"Fuel injection: In an internal-combustion engine, introduction of fuel into the cylinders by a pump rather than by the suction created by the movement of the pistons."
燃油喷射:用泵而不靠活塞运动产生的吸力将燃油喷入内燃机汽缸。