1.
positive contact off-bottom spacer
喷射眼距井底最优距离定位器
2.
range-range positioning
圆-圆定位，距离-距离定位
3.
Analysis and Optimization of Jet Distance in Fluid Jet Polishing by CFD
基于CFD的射流抛光喷射距离的分析和优化
4.
The best development effect will be achieved if the distance between the horizontal well and the oil-gas interface accounts for 80% to 90% of the oil bearing thickness.
水平井距油气界面的距离为含油厚度的80%～90%时开发效果最优。
5.
Design of the optimum plate position and the distance between two Adjacent plates of rotated plate piles
旋扩珠盘桩最优盘位和盘间距的确定
6.
maximum reach of unloader
卸粮器最大伸出距离
7.
instantaneous maximum torque of clutch
离合器瞬时最大转距
8.
remote plan position indicator
远距离平面位置指示器
9.
remote plane position indicator
远距离平面位置显示器
10.
bearing distance heading indicator
方位－距离－首向指示器
11.
BDHI (Bearing Distonce and Heading Indicator)
方位、距离和航向指示器
12.
Numerical simulation of the best throat pipe diameter of jet pump based on PHOENICS
基于PHOENICS的喷射泵最佳喉嘴距数值模拟
13.
fixed-range mark generator
固定距离标记发生器
14.
definite time limit distance relay
定时限远距离继电器
15.
With a vaporizing gas drive, miscibility is achieved at some distance from the injection well.
在蒸汽驱中，混相在距注井一定距离出现。
16.
Quadratic Clustering Algorithm based on Least Distance in DOA Location
测向交叉定位中基于最小距离的二次聚类算法
17.
Vision-Localization Method of Robot Based on the Distance-Constraints of Feature Points;
基于特征点距离约束的机器人视觉定位方法
18.
Hop Count-based Localization Scheme for Wireless Sensor Network
基于距离矢量的无线传感器网络定位算法研究