1.
The"8" CNC Machining Lubricants Slot Strategy Based on G32
基于G32的“8”润滑油槽数控加工策略
2.
Processing Method of Intercrossing Lubricating Oil Grooves in Inner-spheral Surface of Bearing Outer Ring
轴承外圈内球面上交叉润滑油槽的加工方法探讨
3.
Lubricating grooves
GB/T6403.2-1986润滑槽
4.
To lubricate with grease.
用油润滑，给…上润滑油
5.
Gear lubricants may congeal and channel in cold weather.
天气冷时齿轮润滑油可能凝结而形成凹槽.
6.
oil and grease distributor
润滑油和润滑脂分配器
7.
preservative lubricating oil
封存[防锈]润滑油
8.
petroleum, oil and lubricants
汽油、机油及润滑油
9.
Petrol, oil and lubricants
汽油、机油和润滑油
10.
ring-oiled sleeve bearing
油环润滑式滑动轴承
11.
"Then, with the detector filled with oil, an air pressure of 175 kPa is applied to the detector tank. This pressure forces oil through the engine lubricating system. "
这时,检查器充满油,提供给检查器油槽175千帕的压力,这一压力使油流过发动机的润滑系统。
12.
There is one oil groove in the bronze bushing, where lubricant can flow into the axis from the oil hole on the cap of housings.
轴瓦内表面的不承担载荷部分开有油槽，润滑油通过进油孔和邮沟流进间隙。
13.
Numerical Calculation and Study on Lubrication Performance of Water-lubricated Bearings with Axial Groove
带轴向槽水润滑轴承润滑性能数值分析与研究
14.
steam-refined cylinder stock
汽炼汽缸油,重(润滑)油
15.
grease and oil system
干油和稀油润滑系统
16.
gasoline-oil consumption ratio
汽油-润滑油消耗比
17.
integral lubricating oil sump
内装式润滑油油底壳
18.
regeneration of waste lubricating oil
废润滑油再生（废油再生）