1.
overhead cam shaft
上凸轮轴上部凸轮轴
2.
The camshaft has a cam, on which there is a lob, or bump.
凸轮轴上有一个凸轮，凸轮上有一个凸角。
3.
overhead camshaft engine
上置式凸轮轴发动机
4.
camshaft(journal )turning lathe
凸轮轴（轴颈）车床
5.
As the camshaft continues to rotate, the high spot moves way from the valve mechanism.
因为凸轮轴继续旋转，凸轮轴上的凸起部分离开气门装置。
6.
Design and Dynamic Simulation of Cam Automatic Feeding System for Assembled Camshaft
装配式凸轮轴凸轮上料系统设计及动力学仿真
7.
As the lobe of the cam comes up under the cam follower, it pushes the cam follower upward (away from the camshaft).
当凸轮的凸角在凸轮挺杆下出现时，它推动凸轮挺杆向上运动(离开凸轮轴)。
8.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置
9.
Design and Simulation of Assembled Camshaft's Mandrel Automatic Transportation System
装配式凸轮轴芯轴自动上料系统的设计及仿真
10.
cam shaft drive
凸轮轴传动凸轮轴传动装置
11.
crankcase cam gear bushing
曲轴箱凸轮传动轴衬套
12.
Install a new cam bolt, cam and new nut in the axlRe-align the reference marks.
在轴上安装新凸轮螺栓，凸轮和 新螺帽。重新校准参考标记。
13.
The value-opening mechanism includes a valve lifter and a cam on a camshaft.
一套气门开启机构包括一个气门挺杆和一个在凸轮轴上的凸轮。
14.
But a camshaft driven directly by the crankshaft gear turns in the opposite direction.
但是凸轮轴被曲轴齿轮直接驱动，其将在相反方向上转动。
15.
Two TDC (Top Dead Center) sensors are mounted at the rear of the single camshaft.
两个上死点的传感器安装在凸轮轴的后面。
16.
In addition, when the camshaft is located over the cylinder head, the arrangement is known as an overhead camshaft( OHC) design.
另外，当凸轮轴位于汽缸盖上面时，这种方式被称为是顶置凸轮轴(HC)构。
17.
cam-controlled single spindle automatic lathe
凸轮控制单轴自动车床
18.
Camshaft Holder C-3509
凸轮轴保持架C-3509