1.
Research on the Influence of Temper Temperature of Austenite to High-speed Cutting Properties of Austempering Ductile Iron (ADI);
奥氏体回火温度对等温淬火球墨铸铁（ADI）高速切削加工性能的影响研究
2.
Preliminary Investigation on Austenitic Nitriding and Intermediate Temperature Tempering for 20Cr Steel
20Cr钢奥氏体渗氮中温回火的初步研究
3.
Process Research on the Isothermal Quenching of Ductile Iron of Austenite and Bainite;
奥氏体贝氏体球铁等温淬火工艺研究
4.
The Study on the Overcooling Austenite Isothermal Transformation Diagram and Tempering Technology of Circular Chain Steel in Coal Mine Machine
煤机链条钢过冷奥氏体等温转变曲线及回火工艺研究
5.
Influence of the Tempering Technology on Retained Austenite and Hardness of High-Speed Steel Rolls
回火工艺对高速钢轧辊残余奥氏体和硬度的影响
6.
The Austenite Inverse Phase Transformation Quenching in Zero Time Holding of 40Cr Steel
40Cr钢“零保温”奥氏体逆相变淬火
7.
Grain Boundary Martensite Formation and Tempering Brittleness at Low Temperature of Steels
钢的晶界马氏体形成与低温回火脆性
8.
Research on Tempering Process in Granular Bainite Steel 25SiMoVB
粒状贝氏体钢25SiMoVB回火过程研究
9.
Microstructure and Properties of New Type Bainitic Steels at Low Temperature Tempering
低温回火态新型贝氏体钢的组织性能
10.
The Influence of Tempering Procedure on Mechanical Properties and Microstructures of Bainitic Rail Steel;
回火工艺对贝氏体轨钢组织性能的影响研究
11.
Effect of C and Si on the Toughness of Mn-Series Air Cooling Bainitic Steel After Tempering
碳和硅对Mn系空冷贝氏体钢回火韧性的影响
12.
The microstructure of isothermally-quenched ductile iron (ADI) is a mixture structure consisting of austenite plus acicular ferrite.
等温淬火球铁的显微组织由奥氏体加针状铁素体的混合组织组成。
13.
"ausform: To subject (especially steel) to deformation, quenching, and tempering to improve its wear properties."
奥氏形变法炼钢:使(尤指钢)在经受形变后淬火和回火以增加抗磨损性。
14.
Normalization procedure was added before the transverse rolling for improving steel austenite grain fineness and removing mischcrystal structure.
在横轧前增加正火工序,改善钢的奥氏体晶粒度,消除混晶组织。
15.
Evolution of ultra-fine austenite grains in Nb and Nb-V-Ti microalloyed low carbon steel under cyclic heating-quenching treatment
循环加热-淬火工艺下超细晶奥氏体的晶粒演变特征
16.
ferritic-austenitic alloy steel
铁素体奥氏体合金钢
17.
Krupp austenitic steel
克虏伯奥氏体不锈钢
18.
austenite grainsize determination
奥氏体晶粒大小测定法