1.
The Study on the Loads and Residual Strength of a Damage Ship;
船舶破损后载荷和剩余强度分析研究
2.
Evaluation on dead loading test and bearing capacity of newly-built bridge
新建桥梁成桥后荷载试验及承载力评定
3.
The load at each bearing point is the sum of the two distributed load on two ends.
每个支吊点的荷载为前后两跨段所分配荷载之和。
4.
The load reaches a maximum and then drops down.
载荷在达到最大值后下降。
5.
Equivalent Loads Analysis on Post-tensioned Prestressed Concrete Structure;
后张预应力混凝土结构等效荷载分析
6.
Analysis of Mechanical Performance and Loading Text in Widening Bridge
桥梁拓宽后受力状态及荷载试验分析
7.
Loading Conditions. The selection of loading conditions follows the determination of the type and magnitude of the loads that act on the structure.
荷载条件。确定了作用在结构上的荷载类型大小之后，接着要选择荷载条件。
8.
Second, measure the load of the gear and its revolutional speed in step, and change the load distribution on time into another load distribution on loaded numbers.
制谱时应把载荷时间分布按载荷—转速规律化为载荷次数分布,然后进行制谱。
9.
The position of the last crack is marked before unloading the beam.
标出最后一条裂纹的位置，然后卸去载荷。
10.
Sedimentary loading with consequent thermal blanketing will become major factors.
随着热熄灭作用以后，沉积载荷将变成主要因素。
11.
Total load was then obtained by graphical or numerical integration.
然后，通过图解积分或数值积分可求得总载荷。
12.
The Research of the Fire Resistance of Steel Frames after Subjecting to Impact Loads;
冲击荷载作用后钢框架结构抗火性能研究
13.
Creep characterizes of rabbit tibia under torsion load following exercise
运动锻炼后兔胫骨扭转载荷下的蠕变特性
14.
Post-cyclic loading undrained strength degradation characteristics of silty clay
粉质黏土周期荷载后的不排水强度衰化特性
15.
Ablation Behaviors of Carbon/Carbon Composites After Impact Damage
冲击载荷损伤后C/C复合材料烧蚀性能的研究
16.
The three-dimension finite element analysis of stress in posterior tooth residual root restored post-core crown of different loading direction
不同载荷角度下后牙残根核桩冠修复后三维有限元应力分析
17.
maximum all-up weight [loaded condition]
最高承载重量〔载荷状态〕
18.
empty-side uniformity load
空载侧线路均布载荷