1.
The study of air abrasion on shear strength of mottled enamel-procelain bonding
喷磨处理氟斑牙牙釉质对瓷-釉质粘结强度的研究
2.
Effects of air abrasion on microleakage between mottled enamel and composite resin:A vitro study
喷磨处理氟斑牙牙釉质与复合树脂黏结界面微渗漏的研究
3.
Effect of Shot Blasting on Corrosion and Corrosive Wear Property of Magnesium and Its Alloy;
喷丸处理对镁及镁合金腐蚀磨损性能的影响
4.
Effects of Grinding, Lapping and Cloud Bursting on Martensitic Stainless Steel s Fatigue Strength;
磨削、研磨、喷丸处理对马氏体不锈钢疲劳强度的影响
5.
Research of Heat Treatment Process and Wear Resistance Property of Spray Formed High Si-Al Alloy;
喷射成形高硅铝合金热处理工艺及耐磨性的研究
6.
A nitrogen heat treatment method of nozzles was proposed for the sharp wear, evident high temperature creep deformation of the nozzles for sulfur atomization.
针对硫磺雾化喷嘴存在磨蚀快、温蠕变明显的现象，提出了喷嘴氮化热处理的方法。
7.
WATER-JETS AND ABRASIVE WATERJETS PRINCIPLE AND THEIR INDUSTRY APPLICATIONS
水力喷射和水力磨粒喷射加工原理及工业应用
8.
Study on Nozzle Wear Mechanism and Drilling Test of Swirling Abrasive Water Jet;
旋转磨料射流喷嘴磨损机理与钻孔试验研究
9.
Wear,Material,Heat Treatment and Abrasion Resistance of Card Clothing
针布磨损、材质、热处理和耐磨度的研究
10.
Diffusion treatment, relies upon an immersion or spray treatment.
扩散处理法依靠常压浸注或喷雾处理。
11.
The instruction of the improvement of the grinder for the super hard ball of valve and the principle& the method for the grind.
介绍了球阀的超硬喷涂球体研磨装置的改进及研磨原理和方法。
12.
COMPARATIVE ANALYSIS OF ABRASIVE FOR SHOT BLASTING STEEL STRUCTURE
钢结构抛丸(喷丸)清理用金属磨料的对比分析
13.
Research on Erosion Wear Mechanisms of Ceramic Sandblasting Nozzles Using FEA Methods;
基于有限元法的陶瓷喷砂嘴冲蚀磨损机理研究
14.
A mini-sized sand-blasting gun of ejection-and absorption type, used to clean and roughen the metallic surfaces for thermal spraying.
一种小型的射吸式喷砂枪，可用作喷涂喷焊前的表面清洁毛化处理。
15.
Analyzes the Wear Abrasion and the Method of Reduce the Wear Abrasion of the Impeller for Centrifugal Fan
离心通风机叶轮叶片磨损分析与耐磨处理
16.
The practice indicates that the service time of bimetals barrel is above three times higher than that of nitrogen hardening one.
生产应用证明：粉末等离子弧喷焊制造的双金属耐磨机筒的使用寿命高出氮化处理件寿命三倍以上。
17.
Constructure Theory & Trouble Anlayse Process of HSR-54A/A Refiner;
HSR-54A/A盘磨结构原理及故障分析处理
18.
Nodularizing Facilities and Process with Injecting Passivated Granular Magnesium into Iron Melt
钝化颗粒镁喷吹法球化处理设备及处理工艺