1.
The pattern chain controls the harnesses and determines which are to be raised or lowered in order to produce the desired pattern.
纹板链控制着综框并决定着综框的升降,以便形成所需要的花型。
2.
Each cross bar or row of holes in the roll controls a row of the pattern and mechanically determines which warp yarns (harnesses) will be raised and which lowered.
纹板链上的每一排孔控制着花型的一横行(即一根纬纱),用机械方式控制着经纱(综框)的升降。
3.
Fabric designs can be changed merely by inserting a series of punched cards into the pattern chain.
更换织物时,只需要将一系列冲孔纹板装到纹链上即可。
4.
Corrugated steel plates with lath and lentilform
GB/T3277-1991花纹钢板
5.
y[s/Ta C"O*Qo?l~K+Eu%h:L,Vych:L;HEgFen(Eleo3
棉条纹绒布拉链外短衣
6.
LI4S = link interface TN1316 board.
LI4S=链路接口TN1316板。
7.
LI = link interface TN916 board.
LI=链路接口TN916板。
8.
LI4D = link interface TN1315 board.
LI4D=链路接口TN1315板。
9.
LI4O = link interface TN1669 board.
LI4O=链路接口TN1669板。
10.
Black of the card
盲孔(纹板上无孔的部分)
11.
electrostatic proximity (ESP) card/tag
静电邻近纹板/终端
12.
bellows sealed gate valve
波纹管密封的闸板阀
13.
55 inch thread flat tangential die
55°英制螺纹切线平板牙
14.
The system brings radical change to traditional backward technique.
该系统彻底改变了传统的用大串纹板、钉控制多臂提综、大串梭箱钢板链控制换梭的落后工艺方法。
15.
Pressing sheet metal forming, its substrate should be crack.
压型金属板成型后，其基板不应有裂纹。
16.
corrugating machine, for metal plates or sheets, numerically controlled
金属板材或薄板材波纹机,数控式
17.
The Cold Steel Plate Ridging Analysis and Process Improvement of SUS444
SUS444不锈钢冷轧板板纹分析及工艺改进
18.
Optimal Design of the Web in Corrugated Steel Web Bridge
波纹钢腹板桥梁的腹板优化设计探讨