1.
The fixed anvil of the tube micrometers has spherical surface. They are suitable for measuring the thickness of tubes.
壁厚千分尺固定测砧为球面，适用于测量管壁厚度。
2.
The outside diameter of copper tube shall be tested by Micrometer. The tooth depth and the bottom wall thickness shall be tested by Microscope.
外径尺寸用外径千分尺测量.齿高和底壁厚用双目倒置小金相测量。
3.
In printing, micrometers are used to measure caliper, or thickness of paper and board, the thickness of blankets, plates, packing and other materials.
在印刷方面，千分尺用于量度纸厚；即纸或纸板的厚度，胶布，印版，垫料和其他物料的厚度。
4.
Micrometer on instrument that can be used to measure thickness. Typically used to measure the dry film thickness of paint and the thickness of metal strip.
千分尺—用来测量厚度的工具。通常用作测量涂膜的干膜厚度和带钢的厚度。
5.
Micrometer: An instrument used to measure accurately small distance, thickness, etc.To the nearest 1000th inch or cm.
千分尺:用于精确测量小长度，厚度等的一种仪器，其精确程度达至千分之一寸或厘米。
6.
micrometer space
千分尺能伸缩的隔套
7.
micrometer for checking or measuring
检查或测量用千分尺
8.
Research on Oversize in the Thickness of Shell of Launcher with Pane Figure
方腔式导轨发射装置壳体壁厚尺寸超差研究
9.
Measure the diameter of wire with 0.01mm micrometer.
用分度值为0.01的千分尺测量外径。
10.
Numerical Analysis of Wall-thickness Thinning during the NC Tube Bending Process;
薄壁管数控弯曲成形壁厚变薄的数值分析
11.
Research on Non-uniform Wall Thickness of Thin-wall Pipe Rolled by Three-high Pipe Mill
三辊轧管机薄壁管轧制壁厚不均的分析
12.
Numerical Simulation & Parameters Optimization of the Hot Forming Process for a Large-Scale Thick-Walled Semi-Spherical Head;
厚壁大尺寸半球形封头热成形数值模拟与参数优化
13.
Study of Thermal Stress Distribution on Thick Wall Cylinder by Thermal Shock Treatment;
厚壁圆筒热冲击作用下应力分布研究
14.
Clinical Analysis of 199 Cases of the Hepatic Cirrhosis with Gallbladder Wall Thickening;
肝硬化合并胆囊壁增厚199例临床分析
15.
Clinical Analysis of 334 Cases the Hepatic Cirrhosis with Gallbladder Wall Thickening
肝硬化合并胆囊壁增厚334例临床分析
16.
Service Life Analysis for the Thick-wall Components of the 600MW Supercritical Boiler
600MW超临界锅炉厚壁部件寿命分析
17.
Analysis on Thickness of Pressure-lubricating Deep Drawing of Magnesium Alloy Cylindrical Cups
镁合金筒形件压力润滑拉深壁厚分析
18.
Finite Element Simulation Analysis of Welded Tube Forming with Small Diameter and Thickness
小直径厚壁焊管成型有限元仿真分析