1.
A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.
不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.
2.
Square taper washers for slot section
GB/T853-1988槽钢用方斜垫圈
3.
stainless steel nylon ring square hinge
不锈钢尼龙垫圈方铰链
4.
Square taper washers for I section
GB/T852-1988工字钢用方斜垫圈
5.
High strength plain washers for steel structures
GB/T1230-1991钢结构用高强度垫圈
6.
Trapezed steel wire for spring washer
GB/T5222-1985弹簧垫圈用梯形钢丝
7.
horse shoe washer
开口垫圈,马蹄形垫圈
8.
Washers with ball face
GB/T849-1988球面垫圈
9.
Washers with split
GB/T851-1988开口垫圈
10.
Plain washers--Small series--Product grade A
GB/T848-1985小垫圈--a级
11.
Plain washers--Normal series--Product grade A
GB/T97.1-1985平垫圈-a级
12.
Washers with cone face
GB/T850-1988锥面垫圈
13.
" Specifications of high strength bolts with large hexagon head, large hexagon nuts, plain washers for steel structures"
GB/T1231-1991钢结构用高强度大六角头螺拴、大六角螺母、垫圈技术条件
14.
Stainless steel stuffing box hardware is standard (ie. bolts, gland studs, nuts, washers).
标准的金属密封不锈钢填料箱（如螺栓、填料压盖螺栓、螺母、垫圈）。
15.
Specifications for spring washers--Single coil spring lock washers
GB/T94.1-1987弹性垫圈技术条件弹簧垫圈
16.
Inner sphere washers
GB/T1030-1988内球面垫圈
17.
Plain washers--Large series--Product grades A and C
GB/T96-1985大垫圈-A和c级
18.
Plain washers--Product grade C
GB/T95-1985平垫圈-c级