1.
circular or cup-shaped blade for leathersplitting, trimming or paring machines
皮革剖层机、修边机或削底边机用刀片，圆形或杯形的
2.
Trimming machine for inner lining & sole
鞋底、内里、修边机
3.
Constructional design of floating milling unit for steel plate milling machine
钢板铣边机浮动铣削单元的结构设计
4.
Bottom margin
底部边距,底边,底线
5.
Tilting hi-speed sole welt grinding & roughening machine
旋转式高速鞋底边墙磨粗机
6.
Production mechanism and rising law of water cut for edge and bottom water reservoir
边底水油藏开采机理与含水上升规律
7.
The insoles after skiving and cutting by this machine require no artificial buffing, and are flat and smooth sithout any discard.
本机削薄持的中底，无须人工打磨，平整光洁，无报废。
8.
Solidworks-based Smart Design for Underframe of Quayside Container Cranes;
基于Solidworks岸边集装箱起重机机房底架智能设计
9.
Border patterns are woven or printed parallel to the selvage. In what is usually the most effective design the pattern is placed on the crosswise grain with the border along the hem or sleeve edge.
裙边图案有机织的或印染的,与布边平行。通常最有效的设计是裙边沿着底边或袖边,横丝绺放置。
10.
Mechanical shear components, the need for edge processing, shaving its capacity of not less than 2.0 mm.
气割或机械剪切的零件，需要进行边缘加工时，其刨削量不应少于2.0㎜.
11.
This machine can be used to fluff, trim and polish all kinds of outsoles.
本机适用于各种外底的起毛、修边和抛光加工。
12.
Study on Near Bottom Dynamics and Sediment Processes in Turbidity Maximum
基于底边界层研究的航道回淤机制分析
13.
a sloping edge on a cutting tool.
切削工具上倾斜的边缘。
14.
disc, cutting, toothless, for hand or machine saws (excl. discs fitted with abrasive rims or peripheral inserts)
手锯或机用锯切削盘,无齿的（不包括装配有磨配边或周边镶齿的圆盘）
15.
For grinding HSS and carbide engraving cutter as well as single lip or multiple lip cutters of various shapes such as radiuses cutters or negative taper angle of cutters.
该机可用于磨削各类形似半圆角或反锥角的高速钢和硬质合金雕刻刀具和单边或多边刀具。
16.
A Felling Machine is a machine that is used mainly for the final sewing of hems, but can also be used for securing neck and armhole facings.
缲边缝纫机主要是用于底边／下摆的最后缝制,但也可用这种线迹来保护领圈和袖窿的贴边。
17.
The driving mechanism for the Midale pools is interpreted to be a combination ofedge water and bottom waterdrive systems.
油藏驱动机制可能为边水和底水两种类型的结合。
18.
Spreading the lower side of the front panel plate outward( arrow B), detach the plate from the body.
向外侧拉伸前面板框的底边（头B）把板从机体上卸下。