1.
reaming and pushing machine for piston connecting rod bush
活塞连杆衬套铰压机
2.
Mechanical connections of articulated bus Ball socket
GB/T7726.4-1998铰接式客车机械连接装置球形衬套
3.
Analysis of Small End Bushing and Crosshead Pin Failure of Fresh Hydrogen Compressor Connecting Rod in Hydrocracking Unit
加氢裂化新氢压缩机连杆小头衬套与十字头销烧损原因分析
4.
A beam that connects the piston rod to the connecting rod of a reciprocating engine.
十字头连接活塞杆和往复式发动机连杆的横杆
5.
Design of Warm Extrusion Process for Roughcast of Engine Connecting Rod Sleeve
车用发动机连杆衬套毛坯温挤工艺设计
6.
pin joining a piston to a connecting rod.
连结活塞和机器连杆的销。
7.
When discharging, the motor operates, hydraulic cylinder charges pressure, push rod (piston rod) draw back, the valve plate connected with push rod opens, the materials are discharged.
当需要卸料时，电机运转，液压缸增压，推杆（活塞杆）收回，和推杆连接的阀板开启，物料卸下。
8.
"After the piston-and-connecting-rod assemblies have been removed from the engine and the pistons and rods separated, the rings should be removed from the piston.."
先将活塞及连杆组件从发动机上拆下再把活塞与连杆分开之后,即可将活塞环从活塞上取下。
9.
"As the piston nears TDC, ignition takes place. The high combustion pressures drive the piston down, and the thrust through the connecting rod turns the crankshaft."
当活塞接近上止点时,发动机点火。燃烧产生的高压驱动活塞向下运动,通过连杆,推动曲轴转动。
10.
Strength Analysis of Master Connecting Rod for Stern Motor Radial Engine
某型星形活塞发动机主连杆强度分析
11.
Research of Measure System of the Piston and Connecting Rod Base on the LAN;
基于LAN的柴油机活塞—连杆组检测系统
12.
An Analysis of the Improvement of Piston-Con Rod-Crank-Shaft of CG125 Engine
CG125发动机活塞连杆曲轴改进分析
13.
Compressor may be reciprocating positive displacement or centrifugal.
压缩机可以是活塞式、螺杆式或离心式。
14.
A Hydraulic-Mechanical Driving Press with Bi-bar Toggle-lever Force Amplifier in Series
铰杆-杠杆串联增力液压-机械复合传动压力机
15.
The connecting rod is attached to the piston by the piston pin.
连杆与活塞的连接是采用活塞销。
16.
STUDY ON LATERAL BUCKLING OF AN ARCHED LINK OF FOUR BAR LINKAGE
铰链四杆机构圆弧型连杆的侧向失稳分析
17.
piston connecting rod arrangement misalignment
活塞-连杆布置失中
18.
"The Burning of gasoline inside the engine produces high pressure in the engine combustion chamber. This high pressure forces piston to move, the movement is carried by connecting rods to the engine crankshaft"
汽油的燃烧在发动机燃烧室中产生的高压力,推动活塞运动,并通过连杆传到发动机曲轴。