说明:双击或选中下面任意单词,将显示该词的音标、读音、翻译等;选中中文或多个词,将显示翻译。
您的位置:首页 -> 句库 -> 抛磨机
1.
Research on the Static and Dynamic Characteristics of Multi-axes Blades Grinding Machine Tool;
多轴叶片数控抛磨机的静、动态力学性能研究
2.
a tool or machine used for wearing down or smoothing or polishing.
用来磨平打磨或抛光的工具或机器。
3.
Chemical mechanical polishing for silicon wafer by composite abrasive slurry
利用复合磨粒抛光液的硅片化学机械抛光
4.
Design and Motion Simulation of Curved Surface Polishing Mechanism with Tri-Grinding-Head
三磨头曲面抛光机构设计及运动仿真
5.
The most common finishing operations are mechanical, such as milling, grinding, or polishing with abrasives.
最普通的精加工工序是用机械的方法,如研磨,磨削或用磨料抛光。
6.
Wool wheel installed in the last mounted wheel is usually used with polishing powder( cerium oxide).
产品描述:羊毛毡类抛光磨具常常被安装在玻璃磨边机最后一个磨头上,与抛光粉(化铈)合使用。
7.
Influence of abrasive and chemical composition on chemo-mechanical polishing of MgO single crystal substrate
抛光液中磨料和化学成分对单晶MgO基片化学机械抛光的影响
8.
Preparation and Size Classification of Alumina Series Abrasive Particles for Chemical Mechanical Polishing;
氧化铝系化学机械抛光磨料的制备及颗粒分级
9.
Investigation on Mechanisms and Rules about Lapping & Polishing Process for End-faces of Optical Fiber Connectors;
光纤连接器端面研磨抛光机理与规律研究
10.
Preparation of Ti or Zr-doped Ceria Abrasives and Their Chemical Mechanical Polishing Performance
钛锆掺杂CeO_2磨料的制备及其化学机械抛光性能
11.
SOUND-STRUCTURE ANALYSIS AND NOISE CONTROL OF CERAMIC POLISHER'S GRINDING HEAD
陶瓷用抛光机磨头声-结构分析及噪声控制
12.
polished dressing
磨光,抛光,敷面打光,研磨
13.
Study on AFM Polishing of Flow Passage of Centrifugal Compressor Impeller and Its Effects on Compressor Efficiency
离心压缩机叶轮流道磨料流抛光及其对压缩机效率的影响
14.
This machine can do precise polishing for artificial marbles and anti-static flooring boards, This kind of workpieces does not need manual repair after the polishing.
本机床可对人造大理石板、静电地板进行表面精细抛光,抛光后的工件表面不再需要人工修磨。
15.
Mainly used in the driving of electricity or wind-driver tools,applicable in fine buffing of inner hols orelbow pipes of work pieces.
主要用于电磨机或风动工具上。适用于工件内孔、弯道的精抛等。
16.
Study on Erosion Mechanisms and Polishing Technology of Hard-Brittle Materials Machined with Precision Abrasive Waterjet;
精密磨料水射流加工硬脆材料冲蚀机理及抛光技术研究
17.
Study on the Technologic Parameter and Wear Model of Retaining Ring in Chemical Mechanical Polishing Process;
化学机械抛光保持环工艺参数及磨损模型的研究
18.
Development of a New-type Extra Wear Resistance Material for the Ceramic Polish Line and the Sliding-plate in the Feeding System of Press;
陶瓷抛光线及压机布料托板用高耐磨新材料的开发