1.
Design of Oil Return Valve Based On SolidWorks
基于SolidWorks平台的回油阀设计
2.
Check valves or as a one-way valve. For the hydraulic system to prevent reverse flow of oil flow.
单向阀又称止回阀或逆止阀。用于液压系统中防止油流反向流动。
3.
Check Valve 1;Check Valve 2;Check Valve 3;Screw-down
止回阀 1;止回阀 2;止回阀 3;旋拧阀
4.
Type of valve- gate, globe, check, etc.
阀门种类：闸阀，截止阀，止回阀，蝶阀，球阀，等等。
5.
This is a gate valve (check valve, butterfly valve, cut-off valve, magnetic valve, remote valve, relief valve, throttle valve, cock).
这是一个闸阀（止回阀、蝶阀、切断阀、电磁阀、遥控阀、安全阀、节流阀、旋塞）。
6.
dual way check valve
双向止回阀（双通单向阀）
7.
check-valve mounting bracket
止回阀(装置)托架
8.
hoist cylinder oil relief valve
起重机油缸油压安全阀
9.
Now bring the check assembly through the check retaining wall.
现在将止回阀通过止回阀护壁取出。
10.
General purpose industrial valves-Casting iron globe valves and lift check valves
GB/T12233-1989通用阀门铁制截止阀与升降式止回阀
11.
The check valve and relief valve seats shall be push-in type.
这种止回阀和安全阀阀座应该是推入式的。
12.
Seat discs shall be reversible to extend check valve life.
阀座阀瓣应该是双向的，能够延长止回阀寿命。
13.
A pressure differential relief valve is located in a zone between the check valves.
压差安全阀位于止回阀之间的区内。
14.
The check valve seats shall be of molded thermoplastic construction.
止回阀阀座应该是模制热塑塑料结构。
15.
General purpose industrial valves--Cast iron swing check valves
GB/T13932-1992通用阀门铁制旋启式止回阀
16.
General purpose industrial valves-Steel swing check valves
GB/T12236-1989通用阀门钢制旋启式止回阀
17.
Check valve tags are typically mounted on the rim of the cap.
止回阀标签通常安置在阀帽的边缘上。
18.
Test ports shall have internal check valve and be equipped with caps.
测试端口应该内置止回阀并配置阀盖。