1.
Install screws in track assembly.
在轨道组合中安装螺钉。
2.
Bracket mounting screws should be inspected regularly for tightness.
要定期检查托架安装螺钉是否结实。
3.
Install the screw in the trim panel depression.
安装饰板压低处的螺钉。
4.
Loosely install the line clamp/holder bolts.
管路扣夹/支架的螺钉不要安装得太紧。
5.
Had better use nickel-plating screw or stainless screw and waterproof glue to install the material.
（五）最好使用镀镍螺丝钉、锈钢螺丝钉和防水胶水安装。
6.
Install screws attaching seat function switch to seat trim panel.
安装连接座椅功能开关至座椅饰板的螺钉。
7.
IGNITION SWITCH MOUNTING SCREWS (3)
点火开关装配螺钉（3）
8.
screw lower bridge of automatic device
自动装置下夹板螺钉
9.
hexagonal safety set screw
六角头安全固定螺钉
10.
Install the handbook , all assembling of complete fastening screw according to, read all above important safe explanation carefully please.
根据本安装手册,完全紧固所有的装配螺钉,请认真阅读以上重要的安全说明."
11.
Damage can also occur if the screws are used directly on the unit without the brackets of the factory-installed car stereo.
如果螺钉直接装在本机上而不使用工厂安装的汽车立体声机架，也可能造成损坏。
12.
This packet is supposed to contain ten screws, but it's two short.
这包应装有十个螺丝钉, 可是短了两个.
13.
Generally, two screws are placed in the hub: one screw bears on the key and the other bears on the shaft.
一般在轮毂内装有两个螺钉，一个螺钉压在键上，另一个则压在轴上。
14.
Design of Tensile Testing Device for Small Diameter Bolt and Screw
小直径螺栓和螺钉拉伸试验装置的设计
15.
Install column onto the mounting studs.
安装转向柱至装配螺椿。
16.
To clinch(a bolt, for example).
钉牢（例如螺丝钉）
17.
You do not have to unscrew any part of your console. It is easily installed in minutes!
你不需要拧开你机器任何地方的螺丝钉。几分钟内就可以很容易地安装好。
18.
The vault was a small one, but it had a new, patented door. It fastened with three steel bolts and had a timelock.
地下室不大，但装有一扇特制的新门，用三个钢制的螺钉固定着，并安有一把时钟号码锁。