1.
Finite element ANSYS analysis method of bending casing collapsing strength
弯曲套管抗挤强度有限元ANSYS分析方法
2.
Mechanical model and analysis of casing bucking in horizontal wells
水平井套管弯曲力学模型与计算分析
3.
Residual Collapsing Strength Analysis of Bending Part Casing in Medium/Short Radius Horizontal Wells
中短半径水平井弯曲段套管剩余抗挤强度分析
4.
A length of pipe with a sharp bend in it.
（管子的）弯曲处一段有弯曲的管道
5.
To make or form an offset in(a wall, bar, or pipe).
做弯曲使在（墙、杆或管子）上形成壁阶或弯曲
6.
The purse-web spider spins a silken tube like a crooked finger of a glove sticking out of the ground.
囊网蜘蛛织出的丝网是管状的，就像手套上一个弯曲的指头戳出地面。
7.
Research on the Bending Spring-back of Thin-walled Tube and the Control System of Tube Bending Machine;
管材弯曲回弹及弯管机控制系统的研究
8.
Bend the bushing tabs so that they are contacting the leaf spring.
弯曲衬套接头以便接头能与叶片弹簧接触。
9.
Width-thickness ratio of steel plates in concrete-filled rectangular thin-walled steel tube columns subjected to axis force with initial bending
考虑初始弯曲矩形薄壁钢管砼柱管壁屈曲分析
10.
a set of piano pieces orchestrated by the composer
由作曲家谱写成管弦乐的一套钢琴曲.
11.
Experimental Research on NC Bending with Small Bending Radius of Aluminum Alloy Thin-Walled Tube;
铝合金薄壁管小弯曲半径数控弯曲成形的实验研究
12.
Metallic materials--Tube--Bend test
GB/T244-1997金属管弯曲试验方法
13.
Test method for ring bendability of pipeline coatings
管道防腐层环状弯曲性能试验方法
14.
Test method for specific bend-ability of pipeline coatings
管道防腐层特定可弯曲性的试验方法
15.
Oil pump suction tube loose, broken, bent or clogged
油泵吸管松动、破损、弯曲或堵塞
16.
Test method for cross-bending strength of vitrified pipe
GB/T2833-1996陶管弯曲强度试验方法
17.
Determination of deflection for rigid plastic pipes
GB/T8805-1988硬质塑料管材弯曲度测量方法
18.
Heat the glass tube to the point that it can bend.
将玻璃管加热，以能弯曲为度。