1.
flange crossing-transmission shaft universal joint
凸缘叉-传动轴万向节
2.
two -joint inboard slip drive shaft
两万向节滑动的传动轴
3.
"When the two shafts are at an angle to each other, the bearings in the yokes permit the yokes to swing around on the trunnions with each revolution."
当两轴相互处在同一角度上,主动轴转动时万向节叉上的轴承使万向节叉绕万向节十字轴摆动。
4.
propeller shaft pinion flange
传动轴主动齿轮凸缘
5.
It is recommended to make marks on the yolks and the cardan shafts so that you can assemble them correctly.
当安装万向传动装置时建议在万向节叉和传动轴上做明显的记号，以便能够正确地安装。
6.
Align mark on front universal joint, or CV joint, to the mark on the axle pinion yoke, or flange.
将前万向节或CV万向节上的标志与车轴小齿轮轴轭或凸缘上的标志对准。
7.
The Application of Crown Drop of a Needle Roller with Lundberg s Profile on the Univesal Driveshaft Design;
对数凸度设计在十字万向传动轴中的应用
8.
two joint onboard slip drive shaft
两万向节外侧滑动传动轴
9.
Separate the rear universal joint from the transfer case yoke.
从传动箱轴轭上拆下后万向节。
10.
"The four arms of the spider, known as trunnions, are assembled into bearings in the ends of the two shaft yokes."
万向节十字轴的四个轴颈叫做万向节十字头,分别装在两个万向节叉顶端的轴承中。
11.
Cardan shaft with function of energy saving in coasting
与万向传动轴制成一体的滑行节能装置及控制
12.
Radial ball bearings with flanged outer ring--Flange dimensions
GB/T7217-1987凸缘外圈向心球轴承凸缘尺寸
13.
"The driving shaft causes the spider to rotate, and the other two trunnions of the spider cause the driven shaft to rotate."
主动轴使万向节十字轴转动,另外两个万向节十字头使从动轴转动。
14.
The two-section propeller is supported by a center bearing and coupled together by universal joints.
两段传动轴之间有一个中间支承轴承,并由万向节连接。
15.
Align mark on the rear link yoke and universal joint to the mark on the transfer case yoke.
将后连接轴轭和万向节上的标志与传动箱轴轭上的标志对准。
16.
Optimal Design and Kinematical Simulation of the Hooke's Join of Automobile Steering System
汽车转向系统十字轴万向节传动优化设计及运动仿真分析
17.
cam shaft drive
凸轮轴传动凸轮轴传动装置
18.
cam shaft driving gear
凸轮轴传动齿轮凸轮轴传动装置