1.
epoxy enclosed transistor
环氧树脂密封晶体管
2.
epoxy seal transistor
环氧树脂封装晶体管
3.
all conductor leads shall terminate at a terminal board that is permanently cast into the epoxy-sealed cable entry area.
所有导体接头都应该连接在接线端子板上,并采用环氧树脂永久密封在电缆进入区。
4.
Study on Liquid Crystalline Epoxy Toughening Composite Resin Matrixes;
液晶环氧增韧复合材料树脂基体的研究
5.
Synthesis and Curing of a Novel Combined Liquid Crystalline Epoxy
一种新型液晶环氧树脂单体的合成与固化研究
6.
Studies on the Sealant Using Expoxy Modified Arylic Resin and Nano-SiO_2 Composite Material;
密封胶用环氧改性丙烯酸树脂及纳米复合材料的工艺研究
7.
Polyester film,inductive， epoxy resin coating.
聚乙酯膜，有感结构，环氧树脂包封。
8.
Preparation and Properties Study on Encapsulating Materials of Epoxy Resin;
环氧树脂灌封材料的制备与性能研究
9.
Synthesis and Curing Behaviour of Liquid Crystalline Epoxy Resin;
液晶环氧树脂的合成与固化行为研究
10.
Study on Liquid Crystal Epoxy Resin's Synthesizing Characterizing, and Performances;
液晶环氧树脂的制备、表征及性能研究
11.
Study on Thermal Expansion Behavior of EP/PU/DDM System Cured by Microwave
微波固化环氧树脂/苯酚封端的聚氨酯预聚体系的热膨胀行为研究
12.
Nitto Denko Semiconductor Related Epoxy Molding Compound Strategic Analysis of China Market;
日东电工半导体用环氧树脂塑封料中国市场策略研究
13.
a Buna-N cable grommet or a strain relief fitting shall be provided in addition to the epoxy sealed leads.
除此之外,还应该配置丁纳橡胶-N电缆索环或应变消除接头,进一步强化环氧树脂密封接头。
14.
EFFECTS OF FLEXIBLE AMINE T403 ON THE MECHANIC PROPERTIES AND CROSSLINKING DENSITY IN EPOXY SYSTEMS
柔性胺T403对环氧树脂体系力学性能及交联密度的影响
15.
Neoprene grommet and complete epoxy encapsulation provide for a true non-wicking cable entry. An isolating cable chamber is not needed.
氯丁橡胶绝缘垫圈和全部环氧树脂密封，提供真正的无芯电缆连接。不需要另外配置绝缘电缆盒。
16.
"Leather, synthetic rubBer, and silicones are among the materials used for the sealing ring."
密封环用的材料有皮革、合成橡胶和硅有机树脂。
17.
DEVELOPMENT OF EPOXY/EPOXY-SILSESQUIOXANE HYBRID MATERIAL FOR LED PACKAGING
LED封装用环氧树脂/环氧倍半硅氧烷杂化材料的研制
18.
Research Progress in Carbon Nanotubes/Ferrite/Epoxy Absorbing Composite
碳纳米管/铁氧体/环氧树脂复合吸波材料的研究进展