1.
The Spallation of Ductile Metals under Loading of Electric Gun Driven Metallic Flyers;
电炮驱动金属飞片加载下韧性金属层裂研究
2.
a soft silver-white ductile metallic element (liquid at normal temperatures); the most electropositive and alkaline metal.
一种质地柔软的银白色韧性金属元素（常温时为液体），是最具正电性与碱性的金属。
3.
a very thin and flexible sheet of metal.
一片非常薄且有柔韧性的金属片。
4.
Characterization and Measurement of Metals Dynamic Fracture Toughness;
金属材料动态断裂韧性的表征与测试
5.
Fracture Toughness of Al_2O_3-ZrO_2/W/Cr/Ni/Co Cermets
Al_2O_3-ZrO_2/W/Cr/Ni/Co金属陶瓷的断裂韧性
6.
" Metallic materials-Standard test method for JIC, a measure of ductile fracture toughness"
GB/T2038-1991金属材料延性断裂韧度JIC试验方法
7.
Effect of Ti content on microstructure toughness of deposited metal with flux cored wire
钛对气保护药芯焊丝熔敷金属组织韧性的影响
8.
INFLUENCE OF DIFFERENT NON-METALLIC FIBER ON SPLITTING STRENGTH AND TOUGHNESS OF MORTAR
不同非金属纤维对砂浆劈拉强度及韧性的影响
9.
Sliding Wear Properties of Dispersion-Toughened Fe_9Cr_9Si_2-Based Ternary Metal Silicide Alloy
铁基固溶体α弥散增韧Fe_9Cr_9Si_2三元金属硅化物合金耐磨性
10.
As most metals are malleable and ductile they can be beaten into plates and drawn into wire.
由于大多数金属具有韧性和延展性,所以可以压成薄板和细丝.
11.
Addition of activating agent has no obvious effect on fracture toughness of weld metal.
添加活性剂对焊缝金属的断裂韧性没有明显作用。
12.
Preparation, Mechanical Properties and Electronic Structure of Ductile Rare-earth Intermetallic Compounds;
韧性稀土金属间化合物的制备、力学性能与电子结构研究
13.
Effects and Mechanisms of Initial Damage on Ductile Fracture Initiation Toughness of Different Microstructures of Steel;
初始损伤对不同金属材料组织延性起裂韧性的影响及机理
14.
Effects of Several Components on the Toughness of Deposited Metal and Usability of Self-shielded Flux Cored Wire;
几种组分对自保护药芯焊丝工艺性能和熔敷金属韧性的影响
15.
Study about the activity of MMP-2 in intra-articular PCL after ACL injury
前交叉韧带扭转损伤后关节腔内后交叉韧带中基质金属蛋白酶-Ⅱ活性的研究
16.
Fracture toughness of heat-affected zone( HAZ) was between the base metal and weld metal.
焊接热影响区的断裂韧性介于母材和焊缝金属之间。
17.
Characteristically, metals are opaque, ductile, and good conductors of heat and electricity.
从特点来看,金属不透明,有韧性,是热和电的良导体。
18.
Comparison of metallocene polyethylene elastomer and EPDM in toughening modification of PP
茂金属聚乙烯弹性体和三元乙丙橡胶增韧聚丙烯的比较