1.
Lock washers external teeth
GB/T862.1-1987外齿锁紧垫圈
2.
Specifications for spring washers--Toothed lock and serrated lock washers
GB/T94.2-1987弹性垫圈技术条件齿形、锯齿锁紧垫圈
3.
Serrated lock washer external teeth for assembly
GB/T9074.27-1988组合件用外锯齿锁紧垫圈
4.
Hexagon head bolt and serrated lock washer external teeth assemblies
GB/T9074.16-1988六角头螺栓和外锯齿锁紧垫圈组合件
5.
Cross recessed pan head screw and serrated lock washer external teeth assemblies
GB/T9074.2-1988十字槽盘头螺钉和外锯齿锁紧垫圈组合件
6.
A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.
不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.
7.
Countersunk external toothed lock washer for assembly
GB/T9074.28-1988组合件用锥形锁紧垫圈
8.
Flared type tube fittings--Back-up washer
GB/T5652-1985扩口式管接头锁紧螺母垫圈
9.
Cross recessed countersunk head screw and countersunk serrated external toothed lock washer assemblies
GB/T9074.9-1988十字槽沉头螺钉和锥形锁紧垫圈组合件
10.
Cross recessed raised countersunk head screw and countersunk external toothed lock washer assemblies
GB/T9074.10-1988十字槽半沉头螺钉和锥形锁紧垫圈组合件
11.
Remove Pinion Gear Thrust Washer
拆卸主动齿轮止推垫圈
12.
Install the pinion mate gears and thrust washers.
安装小齿轮配合齿轮和止推垫圈
13.
Lock rings with screw and circlip
GB/T885-1986带锁圈的螺钉锁紧挡圈
14.
Lock rings with cone pin
GB/T883-1986锥销锁紧挡圈
15.
Lock ring with scre
GB/T884-1986螺钉锁紧挡圈
16.
Spring lock washer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈。
17.
Tolerances for fasteners--Washers
GB/T3103.3-1982紧固件公差平垫圈
18.
Top view of spring lock washer or spacer with adjustable inside and outside diameters.
内径和外径都可调整的弹簧锁垫圈的俯视图。