1.
Finite Element Analysis and Structure Optimal Design for Composite Seal of Rubber and Metal at Room Temperature and Low Temperature;
常温和超低温橡胶金属复合密封机构的有限元分析与优化
2.
" Rubber, Vulcanized or thermoplastic Determination of compression set at ambient elevated or low temperatures"
GB/T7759-1996硫化橡胶、热塑性橡胶常温、高温和低温下压缩永久变形测定
3.
testing methods for low teperature-retraction of vulcanized rubber
硫化橡胶低温特性的测定 低温度回缩法
4.
testing methods for low temperature retraction of vulcanized rubber
硫化橡胶低温特性的测定低温度回缩法
5.
Rubber and plastics hoses--Subambient temperature flexibility tests
GB/T5564-1994橡胶、塑料软管低温曲挠试验
6.
testing method for stiffness of vulcanized rubber at low temperture
硫化橡胶的低温硬挺度试验方法
7.
Study on the Fluoride Rubber Surface Modification by the Low Temperature Plasma Technique;
低温等离子体对氟橡胶表面改性研究
8.
NBR rubber O-rings provide trouble-free operation at standard temperature ranges. For high and low temperature applications Viton or Silicone.
在常温工作条件下使用丁腈橡胶，在高温或低温时采用氟橡胶或硅橡胶。
9.
Common type: nitrile butadiene oil resistant rubber. Fluoroelastomer and silicon rubber are used in applicable situation of high and low temperature. Use relevant lubricant.
普通型：丁晴耐油橡胶。高温，低温的应用场合，使用氟橡胶和硅橡胶。使用相应的润滑剂。
10.
Rubber--General directions for achieving elevated or subnormal temperatures for test purposes
GB/T9868-1988橡胶获得高于或低于常温试验温度通则
11.
testing method for brittleness temperature of plastics and vulcanized elastomers by low temperature impact
硫化橡胶和塑料的低温冲击脆化温度试验方法
12.
a rubber made at low temperatures (5C, 41F) which is tougher than conventional rubber and is often used in car tires.
低温（C,F）下制成的橡胶，比普通橡胶硬，常用于制汽车轮胎。
13.
testing method for low-temperature compression set of vulcanize delastomers
硫化橡胶的低温压缩永久缩小试验方法
14.
Vulcanized rubber--Determination of low temperature stiffening (Gehman test)
GB/T6036-1985硫化橡胶低温刚性的测定吉门试验
15.
Rubber or plastics coated fabrics-Low temperature impact test
GB/T12584-1990橡胶或塑料涂覆织物低温冲击试验
16.
" Rubber, vulcanized--Determination of low-temperature brittleness(single test piece method)"
GB/T1682-1994硫化橡胶低温脆性的测定单试样法
17.
" Rubber, vulcanized--Determination of low-temperature brittleness(multiple test piece method)"
GB/T15256-1994硫化橡胶低温脆性的测定(多试样法)
18.
Steady State Simulation and Optimization of Low Temperature Styrene/butadiene Emulsion Polymerization Unit;
低温乳液聚合丁苯橡胶装置的稳态模拟与优化