1.
The testing methods of peak withstand current and short-time withstand current for high-voltage apparatus
GB/T2706-1989交流高压电器动热稳定试验方法
2.
testing methods of heat stability for pigments
颜料热稳定性试验方法
3.
Plasticizers--Test method of heat-resistance
GB/T1670-1988增塑剂热稳定性试验
4.
testing method for thermal stability of lubricating oils
润滑油热稳定性能试验方法
5.
Test methods for the thermal stability of polyvinyl chloride resin--Whiteness method
GB/T15595-1995聚氯乙烯树脂热稳定性试验方法白度法
6.
Test method for thermal stability of polyethylene pipes and fittings
GB/T17391-1998聚乙烯管材与管件热稳定性试验方法
7.
Experimental Study on the Thermoacoustic Instability in the Premixed Rijke Combustor;
Rijke型预混燃烧器热声不稳定特性的试验研究
8.
Experimental Study on Combustion Thermoacoustic Instability under the O_2/CO_2 Atmosphere;
O_2/CO_2气氛下的燃烧热声不稳定试验研究
9.
Experimental Study on the Thermoacoustic Instability and Passive Control of Thermoacouxtic Instability in Swirl Combustor;
旋流型热声不稳定特性及其控制的试验研究
10.
The research of the steady-state heat-flux measurement technique for aerothermodynamic experiment
气动热试验中稳态热流测量技术研究
11.
fuel assembly stability test
燃料集合体稳定性试验
12.
lowest continuous speed test with load
最低稳定工作转速试验
13.
A Study on Key Factors Which Effect on the Accelerated Testing Results of the Thermal Oxidation Stability of Polyolefine Resins for Hot-Water Pipe Applications;
影响聚烯烃热水管氧化稳定性强化试验结果关键因素的研究
14.
The Theoretical and Test Study of Integral Stability for Homemade Hot-rolled H-section Beam;
国产热轧H型钢梁整体稳定性能的理论与试验研究
15.
Experimental Research on Overal Stability for Eccentrically Compressed Q460 Hot-Rolled Single-Angle Members
两端偏心受压的Q460热轧等边单角钢整体稳定承载力试验研究
16.
Controllability and stability test procedure for automobiles--Pylon course slalom test
汽车操纵稳定性试验方法蛇行试验
17.
Controllability and stability test procedure for automobiles--Steady static circular test procedure
汽车操纵稳定性试验方法稳态回转试验
18.
The experiments on thermal activation of red mudstone have been made and the colourity, color stability and mechanical properties of red cement with red mudstone were tested.
进行红泥岩的热活化试验,对红泥岩红色水泥的色度、彩稳定性及其力学性能进行测试。