1.
parallel swivel bench vice
平行轮轴钳工台虎钳
2.
The vise (parallel-jaw vice) is available to all of the bench work.
所有的钳工工作都可使用台钳（平口钳）。
3.
The scored jaws of a vise help it bite the work.
台钳上有刻痕的虎钳牙帮助它紧咬住工件。
4.
The vice is bolted to the work-bench.
老虎钳是用螺栓拧在工作台上的.
5.
A grasping tool having a pair of jaws and handles pivoted together to work in opposition.
镊子，钳子一种抓握工具，有一对虎钳牙及交叉的柄，放在轴上一起反方向工作
6.
It is forbidden to hold the work-piece by hand to drill holes. The work-piece must be fixed tightly in jaw vice or fixed it on the worktable with press plate.
禁止用手握住工件进行钻孔，应该把工件紧固在虎钳中或用压板固定在工作台上。
7.
And the little tailor took the bear over to the workbench and fixed its paws firmly in the vise.
小裁缝把熊带到工作台，把它的爪子牢牢固定在虎头钳上。
8.
Avoid falling of work-pieces to hit objects or people while loosing jaw vice.
松紧虎钳时，须防止工件跌落伤物、伤人。
9.
The work-piece must be clamped tightly in jaw vice. Be careful and do not hurt fingers when fixing small work-pieces.
工件必须牢固地装夹在虎钳上，装夹小工件时须防止钳口夹伤手指。
10.
The Virtual Assembly and Motion Simulation of Machine-table Vice Basing on Solidworks
基于SolidWorks的机用台虎钳虚拟装配及运动仿真
11.
grip a piece of wood in a vise
用虎钳夹住一块木片
12.
Invert the differential case in the vise.
在虎钳中翻转差速箱。
13.
Twin piston alloy callipers at the front and single piston callipers at the rear bring the large-diameter wheels to rest.
前轮是双活塞合金制动钳，而后轮是单活塞制动钳，可对大尺寸车轮进行制动。
14.
power tubing tongs with rollover feature
带压紧轮的动力油管钳
15.
A grasping device consisting of two arms joined at one end by a pivot or hingelike scissors.
钳，火钳一种用来抓取的工具，由通过枢轴或枢状剪结合于一端的两臂组成
16.
Study of feasibility to calibrate pincer Amperemeter with Ampere-turn equilibrium principle
采用安匝平衡原理校验钳形表可行性探讨
17.
machine vice, fixed, revolving or adjustable
固定式,旋转式或可调式机床虎钳
18.
Joints are more easily opened, when one end is secured in a vise.
若把一端夹在虎头钳中，则较容易打开。