1.
a mortise joint formed by interlocking tenons and mortises.
通过连锁的凸榫和榫眼制成的榫点。
2.
join by a tenon and mortise.
通过榫和榫眼而连接在一起。
3.
tenoning and through-mortising machine
榫头及贯通榫眼制造机
4.
The tenon does not conform to the mortise, so it can not fit into the mortise.
榫头的大小和卯眼不相符, 无法落槽。
5.
The cross-piece is mortised into the upright post.
横梁和立柱是用榫眼接合一起的.
6.
To fit into a socket or mortise.
插入插座或与榫眼接合
7.
A fan-shaped tenon that forms a tight interlocking joint when fitted into a corresponding mortise.
鸽尾榫嵌入榫眼形成紧扣在一起的接头
8.
dowel milling and cross-cut machine
圆棒榫制造和截断机
9.
tenoning and trenching machine
榫头切削和开槽两用机
10.
A joint so made.
榫头这样制成的榫头
11.
a joint made by inserting tenon on one piece into mortise holes in the other.
通过把一边的凸榫插入另外一边的榫眼造成的接合。
12.
The notch cut into a key that corresponds to such a ridge.
钥匙的榫槽钥匙上切割出的对应锁眼的凸槽
13.
A usually rectangular cavity in a piece of wood, stone, or other material, prepared to receive a tenon and thus form a joint.
榫眼通常在一木头板、石块或其他物质中的四边形的洞孔，用来嵌入另一榫从而形成一个接合点
14.
To be joined together by means of dovetails.
鸠尾榫接头用鸠尾榫结合在一起
15.
To join or attach by means of a joggle.
榫接，啮合用啮合扣或接榫连接或安装
16.
A usually round pin that fits tightly into a corresponding hole to fasten or align two adjacent pieces.
暗榫通常为一圆钉，紧扣在相应的眼里以固定或校正相似的两片
17.
A hole, groove, or slot in a piece of wood into which another piece is inserted.
榫眼木块上的洞、曲缝或狭缝，其中可插入另一木块
18.
a mortise joint made by fitting a projection on the edge of one board into a matching groove on another board.
通过嵌入木板一边的物体进入另外一边的凹槽造成的榫眼。