1.
The adhesion of anterior chamber easily arises when AC-IOL is fixed in the vertical axis.
垂直轴向固定的人工晶状体眼易发生房角粘连。
2.
The steering column stalks that are supplied as spare have no thread on securing plate.
备用方向盘轴柄在固定板上没有螺纹。
3.
Experiment of Dynamic Stiffness on Intelligent External Bone Fixer
智能骨外固定器轴向动刚度实验研究
4.
Heavy-duty thrust bearing; locked to prevent axial movement.
坚固耐用的止推轴承；锁定后有利于阻止轴向运动。
5.
Vibration and stability are investigated for an axially moving beam constrained by a pinned end and a fixed end.
研究一端简支一端固支轴向运动梁的横向振动和稳定性。
6.
Screw, crank cover
曲柄轴盖子固定螺丝
7.
The pin holds the wheel on
轴销把轮子固定起来。
8.
Hub And Bearing Assembly Mounting Surfaces
轮毂轴承组件固定面
9.
Biomechanical Study of the Pressure Attenuation of the Axial Pressurize with the Mosaic External Fixation Device to Treat the Fracture of the Tibia;
镶嵌式外固定器轴向加压治疗胫骨骨折压力衰减的试验研究
10.
Modification for Spindle Support of Temper Mill;
对平整机万向接轴托架的改造—由固定式改为浮动式
11.
Implant lateral mass screw and vertebrae pedicle screw for treatment of atlanto-axial unsteadiness using poly axial screw-rod system
多轴向钉棒系统经寰椎侧块枢椎椎弓根螺钉固定治疗寰枢椎不稳
12.
Problem of Setting Expansion Joint and Calculate Axial Stresses for Fixed Tube Sheet Heat Exchangers
固定管板式换热器轴向应力计算与膨胀节设置问题
13.
Characteristic and stability of supported beam under axial force
轴向力作用两端支承梁的固有特性和稳定性分析
14.
A frame for holding bobbins or spools in a spinning machine.
轴架纺纱机里用来固定线轴的柜架
15.
The hub and bearing assembly does not require removal from the steering knuckle to replace wheel attaching studs in the hub and bearing assembly.
更换轮毂及轴承组件内的车轮固定螺桩无需自转向关节中取出轮毂及轴承组件。
16.
During steering maneuvers, the strut and the steering knuckle (through the ball joint and a pivot bearing in the strut's upper retainer) turn as an assembly.
车辆转向时，支柱以及转向关节（经由球形接头与上支柱固定器之轮毂轴承）会一体旋转。
17.
coaxial variable direction coupler
同轴可变定向耦合器
18.
Accurate Axial Location for Particles in Digital In-line Holography
同轴数字全息中粒子轴向的精确定位