1.
a system of epicyclic gears in which at least one wheel axis itself revolves about another fixed axis.
至少一个轮轴围绕另外固定轴旋转的传动装置系统。
2.
Screw, crank cover
曲柄轴盖子固定螺丝
3.
The pin holds the wheel on
轴销把轮子固定起来。
4.
Hub And Bearing Assembly Mounting Surfaces
轮毂轴承组件固定面
5.
A frame for holding bobbins or spools in a spinning machine.
轴架纺纱机里用来固定线轴的柜架
6.
The rear axle is stationary, and is bolted rigidly to the main frame.
后轴是固定的，用螺栓刚性固定在主机架上。
7.
The rear axle used on front wheel drive applications of this vehicle is mounted to the rear leaf springs using isolator bushings at the axle mounting brackets.
车轴利用轴固定支架的绝缘衬套固定于后叶片弹簧。
8.
A new structure for fixing the bearing bush of the connecting lever in a crankshaft press is introduced.
针对曲轴压力机连杆上轴瓦的固定问题，介绍了一种新的固定结构。
9.
Install the straps and bolts to hold the propeller shaft to the yoke.
安装扣夹和螺栓，将传动轴固定到轴轭上。
10.
A hollow shaft that rotates on a solid shaft when gears are engaged.
套管轴齿轮啮合时，在一固定机轴上旋转的中空轴
11.
A spindle or an axle used to secure or support material being machined or milled.
紧轴一根用于固定或支撑待切削或粉碎原料的新心轴或轮轴
12.
Install differential case and dummy bearings in axle housing (without shims) and tighten retaining cap bolts.
在轴壳内（没有垫片）安装差速箱和模型轴承，并紧固固定帽螺栓。
13.
To revolve around a fixed point or axis.
旋转绕一个固定点或轴转动
14.
For bar specimens, the specimens are mounted with the long axis vertical.
测试棒试片以长轴垂直地面方式固定。
15.
Secure axle to device.
将车轴固定到支撑设备上。
16.
Shafts and hubs are usually fastened together by means of keys.
轴和轮毂通常用键固定在一起。
17.
Replace the front strut upper mount and bearing
更换前支柱上固定座与轴承
18.
The steering column stalks that are supplied as spare have no thread on securing plate.
备用方向盘轴柄在固定板上没有螺纹。