1.
Check valve and butterfly valve combinations are very popular; normally a short spool piece is required between the valves.
止回阀与蝶阀的连接是经常发生的事,通常需要在这两种阀门之间加上一节短短的阀槽。
2.
The median groove of a diatom valve.
阀缝硅藻阀上的中槽
3.
Slide one half of the splash guard into the groove on the relief valve body.
将防溅保护的一半滑动到安全阀阀体的沟槽上。
4.
Clip cable to cable guide at valve cover.
把电缆夹进阀盖上的电缆导槽。
5.
Investigation into the Cavitation Noise in Grooves of Spool Valve;
液压阀芯节流槽气穴噪声特性的研究
6.
The Flow Distribution Analysis of Spool’s Different Pressure Slots Based on FLUENT
基于FLUENT的阀芯不同均压槽流场分析
7.
The valve stem with its grooved rings and positioning sleeve indicates the throttled position of the valve.
阀杆及其沟槽环和定位套筒显示阀门的节流位置。
8.
Investigation into Flow Coefficient of Orifice and Calculation of Steady Flow Force of Spool Valve with Notches;
节流槽滑阀阀口流量系数及稳态液动力计算的研究
9.
The valve cover shall be held in place through the use of a single grooved style two-bolt coupling.
阀盖应该通过单个沟槽状双螺栓联结器固定住。
10.
How to Select the Main Parameters of the Grooved Ball- Chamber of Closed Valve Bonnet on Sucker Rod Pumps.
抽油泵闭式阀罩槽形球室主要结构参数的选择
11.
Research on Hydraulic Valve with V-Groove on CFD Numerical Analysis;
基于CFD解析具有V型槽的液压滑阀特性研究
12.
The Study and Design of NC Machining Spiral Groove of the Needle Valve Fuel Injector;
喷油嘴针阀螺旋槽加工数控系统研究与设计
13.
Study on Growth Characteristics of Cavitation Bubble in Throttling Grooves of Hydraulic Valve
液压阀节流槽内气穴气泡生长特性的研究
14.
The design of the new type outside fall lift spring safety valve
火车槽罐用外置全启式弹簧安全阀的设计
15.
Remove stem nuts (22). Keep stem from turning by inserting screw driver in slot on end of stem.
拆卸阀杆螺母(22)。通过在阀杆末端的槽内插入螺丝刀来避免阀杆旋转。
16.
Slide the other half of the splash guard into the groove on the relief valve body and reassemble the two parts together.
将防溅保护的另一半滑动到安全阀阀体的沟槽上，将两半部件重新组装在一起。
17.
The molded PTFE ring is bonded into a seat ring groove in the face for maximum service life.
这种模铸聚四氟乙烯环粘合在阀座表面的阀座环槽内，最大限度延长使用寿命。
18.
Installs pipe assemblies, fittings, valves, and fixtures, such as sinks, toilets and tubs, using hand and power tools.
用手动及电动工具装设水管零件、备、阀及设施，例如:水槽、所及浴缸。