1.
Study on the Measuring Techniques of the Symmetry Axes of Warhead Based on Indoor GPS;
基于室内GPS的弹头形心轴线测量方法的研究
2.
Abstract: In this paper, the characters of two kinds of urban structure, the concentric circles with single center and the spool thread with poly-centers, have been discussed.
文摘:分析了两种城市结构即单中心同心圆与多中心轴线式的特点。
3.
The plan cross-section throughout the height of the tower is continuously changing.
底部和顶部轴心位置不重合，中轴线倾斜。
4.
The large scale bend axis piston pump axial setting and pump package centre adjusting method
大型斜轴泵轴线设置与泵组中心调整方法
5.
distance from spindle nose to central line of table
主轴端面至工作台中心线距离
6.
axial wire bead
同轴电缆心线的绝缘垫圈
7.
Research on the Nonlinear Stability of Aluminum Alloy Axial Compression Members;
铝合金轴心受压构件非线性稳定研究
8.
Strain Distribution Curves for Cement Concrete under Axial Compression
水泥混凝土轴心受压应变的分布曲线
9.
Having the axis located elsewhere than at the geometric center.
偏轴的，不同中心的具有在几何中心以外的轴线的
10.
Method of Determining Cental Line and Axis Line of Inclined Well Winch of Coal Mine
煤矿大斜井绞车增型中心线及轴线给定方法
11.
moving or directed toward the center or axis, especially when spinning or traveling in a curve.
向中心或轴线移动或者朝向中心或轴线，特别是在以曲线旋转或者移动的时候。
12.
A line through the optical center of a lens that is perpendicular to both its surfaces.
光轴通过透镜的中心垂直于物体两面的线
13.
Circular disk was rotating about an axis tilted from the normal through the center.
圆盘绕一个通过中心与法线方向倾斜的轴转动。
14.
New Structure of Slip Ring with Own Axial Ventilation Holes and Centrifugal Blades in the Winding Rotor Motor
具有轴向通风孔和离心风叶的绕线电机滑环
15.
A sinusoidal curve is defined as a wavy line that has identical amplitude on each side of the central axis.
纤维呈波浪状的曲线,在纱线轴心两侧探出相同的高度。
16.
Telecentric operation (field rays leave parallel to optical axis, unlike Barlow lenses which diverge rays).
远心手术（场射线离开平行光轴，不像巴卢镜片，其中发散射线）。
17.
Only when two elements have the same symmetrical center lines or axes, can they be drawn half divided by center line.
仅当两个要素具有公共对称中心线或轴线时，可以各画一半，并以中心线分界。
18.
Axial limitation of the slevve movement by means of a patented thrust system located in the center line of each gearing.
采用位于每套齿轮中心线的专利推力系统对轴套的位移进行轴向限制。