1.
Cedervall sterntube stuffing box
雪特伏型尾轴填料函
2.
main engine stuffing box lubricating oil dirty tan
主机填料函污滑油柜
3.
piston cooling gland
活塞冷却填料函压盖
4.
Packing: Packing contains corrosion inhibitor to avoid stem pitting. Stuffing box is deep, assuring long packing life.
填料：填料内含防腐剂，避免锈蚀阀杆。深度填料函确保较长的填料使用寿命。
5.
Stuffing Box– optional lantern rings and grease injectors are available.
(3) 填料函-可配置备选灯笼环和润滑油注射器。
6.
Stuffing Box ? optional lantern rings and grease injectors are available.
填料函-可配置备选灯笼环和润滑油注射器。
7.
Experimental Study on Typical Filler for Passenger Dedicated Railway Subgrade Roadbed by Static and Dynamic Triaxial Test
客运专线铁路基床填料动静三轴试验研究
8.
Stem bearing to assure concentric stem rotation, allowing stem packing to provide maximum sealing effectiveness.
阀杆轴承保证同轴阀杆的旋转，使得阀杆填料具有最大的密封效果。
9.
Large stuffing box accommodates all packing arrangements, including live-loaded design and lantern ring type for severe services.
大型填料函可适应所有填料配置排列，包括适用于严酷应用环境的动负载结构和套环。
10.
Gland Eye Bolts: Eyebolts swing aside for ease in repacking the stuffing box.
压盖有眼螺栓：有眼螺栓可以从旁边旋起，使得填料函的填料更换更加容易。
11.
Stuffing box is integral with agitator housing for positive alignment of shaft.
依据混合器轴的实际安装情况，一个完整的填料箱。
12.
End-suction centrifugal pumps--Dimensions of cavities for mechanical seals and for soft packing
GB/T5661-1985轴向吸入离心泵机械密封和软填料用的空腔尺寸
13.
Stuffing box is integral with agitator base for positive alignment of shaft.
依据混合器轴的实际安装情况，设计一个完整的填料箱。
14.
Check that the hollow shaft and its seal are proper and that the packing gland should not compress too tightly on the packing set and the drip leakage is allowed.
检查空心轴和轴密封程度是否适当，填料压盖不可将盘根压得过紧，允许呈滴状渗出。
15.
Production and application of thrust bearing,and guide bearing made of filled PTFE in submarine motor pump are introduced.
介绍了潜水泵中止推轴承与导向轴承用填充聚四氟乙烯材料进行的生产和应用。
16.
A stuffing, as for poultry or fish.
填料调味填料，如填入家禽或鱼的
17.
To stuff, as for roasting.
填充填料，可供烤炙
18.
Taste Ellen's turkey dressing.
一 Ellen的火锅填料。